20 Most Recent
2008 Lexus Rx 350 - Page 3 Questions & Answers
Rotor thickness pads minimum
Not sure what your issue is other than that its a rotor. Perhaps a more detailed explanation. If your rotors are warped and your getting a wobbled pull when breaking, then replace them. They are probably too warped to be re-cut safely. If your breaks are just getting thin, then replace your break pads and see if you can get your rotors re-cut while your at it so you have a clean and fresh start. If your question is about removing and replacing them yourself then you should buy a repair manual for your car and see how complicated it is. Some cars are easy and it can be done in 30 min but others require special tools or a special process and so you should find out before you start. Cheers.
VSC and Malfunction Indicator came on and stays on
When you say malfunction indicator , do you mean `check engine`` light.
These paired lights can indicate a change in engine air flow and fuel mixture. Try a fresh tank of premium fuel, but first a unscrew and re-screw the gas cap until it ratchets into place. The lights can be triggered by a loose gas cap, a fouled O2 sensor, and several other emission related problems including sticking throttle body components, etc.
This can sometimes be sprayed with carb cleaner inserted in the snorkle area of the air intake where teh snorkle meets the metal intake.
Not finding what you are looking for?