2008 Hyundai Elantra - Answered Questions & Fixed issues

Question edited for clarity and add maker. Question moved to model category.

Shift Cable Repair procedures - Automatic Transaxle Control ...

helantraad.com https://www.helantraad.com > shift_cable_repair_proc... 1. Air cleaner assembly and air duct. · 2. Battery and battery tray. · 3. Remove the nut (A) from the manual control lever. · 4. Remove the shift cable (B) from ...

2008 Hyundai Elantra Automatic Transmission Shifter Cable

Hyundai Parts Pro https://www.hyundaipartspro.com > Automatic-Trans... Automatic Transmission Shifter Cable. 2008 Hyundai Elantra. Genuine Hyundai Part - 467902H100 (46790-2H100). Ships from Hyundai Parts Pro. Rating: 4.8 · ‎361 reviews · ‎$105.19 ..

Question edited for clarity, but not much. Name of model is not 'Elentes'. Yes, they have lots of lights Deidra https://www.google.com/search?q=2008+hyundai+Elantra+Lights ..

look for the metal rod the handle is attached to. you should be able to move that back and forth (latching and unlatching), with pliers, if you can reach it

Most vehicles have 2 fuse boxes. One under dash and one under hood.

It is located under the alternator. If you are looking down at the engine, it is to the far left. If you are under the car it is to the far right before the oil pan.

Could be worn volume-control (potentiometer), dust/oxidizing on wiper-track of same control. Buy contact-cleaner spray,such as Servisol, McKenic, Kontakt or similar. If linear slider-type volume, attach tubular nozzle/guide thingy to spray head, squirt cleaner into slot while zooming back & forth (stereo OFF). This scrubs the contacted surface while cleaning. If rotary type, remove stereo, open cover, locate volume control, squirt into control while dialling up and down. Allow a few minutes to evaporate (quick dry spray is best).

On this website you find fuse box description for Hyundai Elantra (2008 - 2009) http://www.autogenius.info/hyundai-elantra-2008-2009-fuse-box-diagram

On this website you find fuse box description for Hyundai Elantra (2008) http://www.autogenius.info/hyundai-elantra-2008-2009-fuse-box-diagram

bleed out the air and get the engine running, then decide if the price is good or not still even if the engine and transmission is faulty requiring replacements , , as the body is in good condition the extra cost may still make it a good buy compared to used car card prices

It sounds like you may have a vacuum leak, or 2 Check all hoses around gearbox and engine to ensure they are all a snug fit and do not appear worn or split. You can check for vacuum leaks by spraying a mist in the direct area and watch to see if it gets sucked in. Move each hose around while at idle to see if the revs change. Good Luck I hope it helps

blacc

You need to check for fault codes and also for fuel pressure.

It may still be under warranty. Take the vehicle into a Hyundai Service Center (dealership), or call them to find out if it's still under warranty. If so, take the vehicle in and they will tell you EXACTLY what the problem is and what's needed to fix it (warranty repair, or parts, labor, tax, time-frame, etc.).

Best Manuals for the best solution of your problem visit this site

Garret, Check wires and socket,running to that taillight for being pinched, damaged,bare copper or burnt. Also if you have a trailer light harness check it or disconnect. Press the helpful button and follow me on fixya for more tips and info.

Your air conditioner comes on to dry the air in defrost mode. It clears the window and removes the moisture (humidity) that is causing the windows to fog up in the first place.

Relay faulty?

Usually it indicates the alternator is not charging. Get yourself a volt meter that plugs into the cigarette lighter. Read the voltage before and after you tart the car. The voltage should go up from 12v to 13/14v. Keep an eye on it. If it slowly goes down, then the alternator needs to be checked.

use a scan tool to reset the ECM first as the CPU program in the ECM may be corrupted from the battery change

Reset required for your radio. what you need to do is pull the fuse panel off! Secondly turn your car on! Thirdly, pull the fuse out for a minute! Fourthly, put the fuse back and push the power button and it will fix the problem! Don't forget to put the fuse panel back on! You will however have to reset all your radio stations! Hope this helps you! by john at cargurus What do you do when there is no sound coming from your radio Hyundai radio code