20 Most Recent
2007 Mercedes-Benz ML320 CDI - Page 8 Questions & Answers
2000 mercedes benz ml 430
The 2000 Mercedes models all utilize a Shift Interlock, which will only allow the vehicle to be shifted out of Park while the brake is applied. The way this works is that a lock pin holds the shift lever in the Park position until a solenoid is powered by the brake light circuit, pulling the lock pin away from the shift linkage. The wire to the solenoid may come loose, or the brake light switch may fail. If someone tried to remove the vehicle from Park without applying the brake, the end of the lock pin may have become jammed. Try two things: 1) Start the vehicle, put your foot on the brake, and attempt to move the shift lever from Park to Reverse. 2) If you cannot remove the vehicle from Park, are the brake lights coming on? If not, a) replace the 15A fuse for the brake light circuit, and b) try Step 1 again. 3) If you cannot remove the vehicle from Park and the brake lights are coming on normally, locate the interlock solenoid at the shift lever and make sure it is properly connected. When you put your foot on the brake, the solenoid should retract. If it does not, check for 12V at the solenoid when you put your foot on the brake. If you have voltage, replace the solenoid. If you do not have voltage, you have a broken wire between the brake light switch and the solenoid. If the solenoid retracts but you still cannot remove the vehicle from Park, your shift linkage may have become bent at the transmission linkage. Hope that's helpful! :)
7/1/2011 7:19:19 PM •
2007...
•
Answered
on Jul 01, 2011
Same dillema, how do I reset the Service B message in a MB ML350?
If you are turning in the vehicle in 3 months I wouldn't worry about changing the oil. In the old days, they use to say change it every 6,000 miles and then as a way to make more money, they started saying every 3,000 miles. But if you really want to reset your computer, unplug your negative cable from your battery terminal and leave it off for five minutes. On a mercedes, they are very advanced piece of work, but doing this may give you another message regarding losing power, so do this at your own risk.
6/3/2011 3:37:59 PM •
2007...
•
Answered
on Jun 03, 2011
320 ml cdi car would
are you sure that your batterys not dead? when you attempted to start it, did the engine turn over? or did nothing? clicking sound? do headlights come on when you try? if not, then try to boost it from another car with booster cables,when the cables from the other car are connected,allow the booster car to run engine while the cables are connected to your battery for 10minutes before you attempt to start your car. this will allow your battery to build the charge to start your engine. if this does'nt work the first time,allow the battery to charge from the booster car for 15minutes. if this does'nt work,remove your battery and take to an autozone or advance auto parts store.they will charge and check your battery for free! you have nothing to lose. if you do not have the above named stores close to you then, charge your battery with a battery charger.which you can purchase at wal-mart or harbor freight tools,k-mart,or a pawn shop! hope this assists you! you can vote on my assistance if you choose to. either way,i know that i've attempted to assist someone somewhere for free! thank you!
1/24/2011 5:13:07 AM •
2007...
•
Answered
on Jan 24, 2011
I have a mercedez benz
check your fluid level and if thats not the problem get it to a shop or drain some fluid to check the color and for metal shavings
1/6/2011 9:55:33 AM •
2007...
•
Answered
on Jan 06, 2011
I have an ml320 1999
When you changed brakes did you replace the sensors? Also check to make sure sensor cable is not cut or shorting out. (Had same problem on 300E, put wheel back on and cut new sensor wire)
I'm not aware of brake sensors having effect on gear shift unless it's a safety feature on your model.
1/3/2011 11:25:41 AM •
2007...
•
Answered
on Jan 03, 2011
How do you reset service msg.
IM NOT SO SURE THAT YOU DONT HAVE TO TAKE IT TO A DEALER. MAYBE CHECK YOUR LOCAL SHOP. IF AT ALL POSSIBLE REFER TO YOUR OWNERS MANUAL.
1/2/2011 4:08:13 AM •
2007...
•
Answered
on Jan 02, 2011
Warning light showing srs what
Hi, SRS stands for Supplemental Restraint System. Your air bag system has detected a fault and shut itself down to avoid an accidental deployment. You will need to visit your dealer or a shop that has a scanner for your SRS to determine the fault and affect appropriate repairs. Please let me know if you have more questions and thanks for using FixYa.
1/1/2011 1:45:46 AM •
2007...
•
Answered
on Jan 01, 2011
Need a radio code for ml 350 2005
cannot calculate from vehicle vin need the radio chassis number but if this is a 2005 then its a dealer only job with diagnostic equipment ,when you do get code write it on the sun visor for safety
12/23/2010 11:10:30 PM •
2007...
•
Answered
on Dec 23, 2010
Not finding what you are looking for?