20 Most Recent 2007 Chrysler Sebring Sedan - Page 4 Questions & Answers

It has two. One that drives the alternator and the a/c compressor and the other drives the P/S pump. I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

The short answer is no. You may be able to measure the length of a belt that does not go around the ac compressor and buy that belt, but chances are you won't be able to route the belt to bypass the compressor and keep it tight.

The answer is specific to the car itself. Does it have an Air Conditioner, etc. Drive to a NAPA or other Auto Parts Store and inquire, they will be able to find the exact belt(s) you need.

Well i think you need a new computer or a good testing of your electronic board sorry man

I not familiar with a "intake manufacture runner control". Do you mean intake manifold? Not you sure what a runner control is though. Could give us some more detailed information?

If this the serpentine belt the tensioner needs to

What is the question on timeing chain for this model ?

Just a guess, but it's worth a try. The computer may have gotten confused. To restart the computer disconnect the battery. Remove the RED wire off the battery then remove the BLACK wire. Let it sit disconnected for about 30 minutes (to discharge the capacitors). Reconnect the battery, and try it. Be aware that your will loose your radio presets.

Testing the ABS sensors on 2008 Chrysler Town and Country Code C101F indicates that there is a failure or fault with the ABS speed sensor or with the sensor wiring/plug. The above video explains about the sensor ( this is general info about the sensor)...

You can hear if the pump is turning on when you turn your key