20 Most Recent 2007 Dodge Ram SRT-10 Questions & Answers

Try this:
1. Turn key on/eng off
2. Press brake pedal slowly 2 times
3. Press gas pedal 2 times within 10secs.
4. Turn key off

2007 Dodge Ram... | Answered on Jan 14, 2016

this is caused by the lifters, it is not an issue in all dodges, just hard run ones.

Dodge Ram SRT-10... | Answered on Dec 12, 2009

Have your brakes bled, that should solve it.

Dodge Ram SRT-10... | Answered on Jun 27, 2009

you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete

Dodge Cars &... | Answered 9 hours ago

If it has one it will be along the inner frame rail, usually on the drivers side.

Dodge Cars &... | Answered 12 hours ago

It's a shift solenoid, a simple fix done by removing the transmission pan and swapping out the bad solenoid for a new one. Diagnose Further with a Good Scanner to find out which shift solenoid is bad, then swap it out. Easy Fix, also inexpensive! See the pictures and the link I've attached below for further info & best of luck friend! https://dodgeforum.com/forum/2nd-gen-dakota-tech/285204-help-p0751.html


Dodge Cars &... | Answered 22 hours ago

"P1206 = Calculated Injector voltage above threshold."
This is an issue with the electrical signal to one or more of the fuel injectors. A Good mechanic or Auto electrician should be able to help sort it out.

Dodge Cars &... | Answered Yesterday

try to leave the key in the ignition for at leas 15 min if nothing happen just take it to mechanic with good scan tools or to the dealer
thank you

Dodge Cars &... | Answered Yesterday

starting noise could be:
1- timing chain is not tide ( the tensioner not doing the right job)
2-the starter sticking on with flywheel all the time
3- engine have low oil
whining noise after turn off could be :
1-vacuum leak 2- Alternator pulley is bad

Dodge Cars &... | Answered Yesterday

Fuel pressure switch ???? Fuel pump relay maybe , no fuel pressure switch . Looking at a wiring diagram for the fuel pump electrical circuit too see what all is involved an then using a DVOM - digital volt ohmmeter to test the fuel pump electrical circuit is how to find the problem .

Dodge Cars &... | Answered Yesterday

Not finding what you are looking for?
2007 Dodge Ram SRT-10 Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts


Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Jonah Oneal

Level 3 Expert

14053 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ram SRT-10 Dodge

  • Ram SRT-10 Dodge

Most Popular Question

voltmeter shot 18v instrument cluster

  • Cars & Trucks