20 Most Recent 2005 Toyota Corolla LE Questions & Answers

I'm wondering if it's NOT the AC but the blower fan, how does the heat side blow? if it's good on all blower settings then, it's more than likely your blender door is not opening and closing all the way. When the blender door stays open a little bit it'll let warmer outside air mix with the cold AC air causing it not to be as cold as it should.

you should have a code number like Pxxxx what is it?

anything can be repaired (fixed) anything. but the better question is why, why spend more money fix'n when new is cheaper. get a media center with USB stick port and rip your cds to mp3, or wave. join 99% of rest of world. CDS are dead tech, end of he road. for ever and ever.....

fix what/ change,what does change mean? my guess you mean the stock signal cd is dead. and you want to upgrade to 6 level cd changer, yes, and yes, well buy the new CD head and changer and bedone or better, get rid of CDs and use memory sticks like reset of world up grade to a media center with usb port, have 4000 songs on a stick 1/4/" long. a center can be had for 99 b ucks.

Best thing is to take the vehicle to a toyota dealer and let them do a diagnostic test on it via the ECU. Thus showing the error codes stored in the ECU. This will save you money in the end by not fixing the incorrect stuff and shows you exactly whats wrong with it. Avoiding guessing. From there you will know whats needed to be fixed.

Torque converter is inside of the bell housing on the transmission

Depending on the grade of fuel you used just run it down to empty and refill with correct grade, as long as you did use diesel or racing fuel youll be fine, and unless your hearing any odd noises like a pinging your fine, I also wouldnt suggest using fuel injector cleaner it doesnt really do much unless you use it reguarly

If auto you refill through the auto dipstick, If manual you will find a plug approx 1/3 - 1/2 way up the side of the g/box. The engine oil drain plug will be infront of the gear box (should be a 14 mm bolt) located on the engine sump.

Question edited for clarity. Question moved to model category. https://www.google.com/search?q=Toyota+5afe+Main+bearing+torque+spec ..

Yes

Not good. https://www.google.com/search?q=TOYOTA+COROLLA+RUNX+cam+and+crank+sensors+have+no+power You need an auto-electrical specialist with a pro grade scan tool computer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

Question edited for clarity. All question need FULL 'year make model;' as first 3 words. Question moved to Toyota Corolla. There are over 40,000 categories to choose from listed by 'make year model'.

Car Shuts Off While Driving: 7 Reasons Why and What To Do

Car From Japan https://carfromjapan.com > Car Talk > Maintenance Tips Jun 13, 2023 - This happens when the engine is very sensitive at idle and can be caused by many things, but the most common reasons are a faulty throttle body ... The easiest way is to find a local auto electrician. A professional grade scan tool computer can diagnose the fault by recording what happens when it cuts out. https://www.google.com/search?q=auto+electrician+near+me ..

Toyota 7A-FE valve clearance (measured cold): - Inlet: 0.15 to 0.25 mm (0.006 to 0.010") - Exhaust: 0.25 to 0.35 mm (0.010 to 0.014") Source: https://workshop-manuals.com/toyota/corolla_sedan_4-door/l4-107.5_1762cc_1.8l_dohc_(7a-fe)/maintenance/tune-up_and_engine_performance_checks/valve_clearance/system_information/specifications/page_815/

Question edited for clarity. Question moved to model category. Engine immobilizer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

As advised by your mechanic, my advise is no different, in the gearbox there are what we term as teeth of different gears and synchronizers...being in such behaviour, your car needs a gearbox overhaul or replacement depending on which will cost you less

Question edited for a lot more clarity. Question moved to 'make and model' for the engine. No that is the last thing it is likely to be! It was working before, why would it fail because you changed the valves? Did you carefully lap the new valves with grinding paste to make sure they sealed? Are they all opening a closing. Is the gap correct? Can you do a compression test?

The 3 Most Common Toyota 1ZZ-FE Engine Problems

TuningPro https://tuningpro.co > the-3-most-common-toyota-1zz... Jun 21, 2021 - Power loss; Poor engine operation. Excess oil consumption is generally anything over 1 quart per 1,000 miles. As oil blows-by the piston rings ...

https://www.google.com/search?q=2e+engine+blows+oil+into+air+filter ..

have you removed the steering wheel cowling ? if not do this as may be another couple of screws there, if you have you have to gently wiggle it as far forward as you can so you can get your fingers behind it and release the speedo cable as it is usually this that is holding back these older car dash's

Sounds like piston blow by, as the gap increases and diesels have such high compression. When the turbo kicks in, the pressure is restored. https://www.google.com/search?q=Toyota+Corolla+2+Litre+diesel.+Why+loss+of+power+at+low+revs+when+warm ..

OK, so they do work, just not when using low beams. That indicates something to do with the headlight switch itself. It controls all lighting and could have an issue when low beams are turned on preventing the gauge/console lights from working. The switch is available aftermarket, I checked on one without fog lights on eBay and found one for around 33.00 shipped free. Pretty easy to replace, just remove the covers on the steering wheel and it's plug-n-play. Best of luck:)