20 Most Recent 2010 Subaru Tribeca Limited Questions & Answers

Question edited for full year make model and spelling. Question moved from Seat (Spanish car maker) Pronounced: See-At. https://www.google.com/search?q=2014+Subaru+Tribeca.+remove+the+2nd+row+seats and https://www.google.com/search?q=2014+Subaru+Tribeca.+replace+fuel+filter ..

Sorry I can't tell you where or how but it is invariably fitted somewhere in the heater air intake in order to keep it cool as during use on the lower speeds it can become very hot. Most are fitted high in the intake but some are fitted near the motor where the intake narrows to take advantage of the higher velocity air flow.

Misfire in cylinders 1, 3, 5.

It is not uncommon for us to think a shop had something to do with a car problem. Most of the time they do a really goo job without causing any damage to other parts of your car. For a simple oil change there's nothing in your car near the AC components that can be affected. If your AC is discharged then just pickup a can of R134 refrigerant with the gauge and hose included and charge the AC. It should be simple as the connector will tipically only fit the Low Pressure port of your AC. if it needs refrigerant just add it until you reach the green area of the gauge. If it does not need it then you should have it check as t could be one of many parts that could need replacement.

Try taking off the headlights and remove the bulbs. When you remove the bulbs, there is a gasket. If there is moisture, you will notice that the outside and inside of the gasket is wet. Use a hair dryer and silicone sealant to seal the gasket and the moisture problem shall go away.

here is how to replace the headlight?:

I would first check the fuse, if you look in your owners manual it will tell you where the fuse box is. On he fuse box cover it will tell you the radio/cd fuse log a tion.

Newer cars with catalytic converters will burn oil/smoke that is leaking, so bad piston rings/valves will not show blue smoke.

find the loose tappet cover and replace the gasket. Check that the PCV valve is working and relieving the sump pressure.

Check sensors in the wheel hubs. Usually have to replace front bearings.