2005 Peugeot 407 1.8 - Answered Questions & Fixed issues
Peugot 407 goes into gear but won.t move
need more information. does it feel like it wants to move or it does not want to do anything. is it a standard or automatic. all this is important. and automatic I would say check the trany fluid. if its a clutch. you could have a bad part. if it feels like it wants to go but wont. is the brakes on. does it make any bad noises when you give it gas. like something is grinding or slipping. all this information could help.
Free timing belt diagrams
the fsm covers this. but what engine>?
to work on engine, you must know what is there.
7 engines.
at least.
1.6 thru 3.0 both gas and diesel.
fsm = factory service manual.
ive locked many a cam, the books show how.
some cams have hex flats to use wrenches (mazda)
others DOCH use cam cog wheel locks
others have SOHC, cam pin hold that you lock with a simple drift pin
the FSM shows this fact, on all cars made. any engine.
not only that you didnt say what step you got stuck?
of the 50 steps.
at the crank pulley,? 1st steps? or are you locking the cam
so you can time the belt. (way far in to install section)
??????????
Peugeot faults
i cant help much no Peugeots here,.
but like all cars, they moved the engine cooling fans controls
to the PCM.
the PCM has programming that trips the fans at a specific temp.
the PCM reads the ECT sensor (main EFI sensor) and at about 215 or more temp , it closes the Fan relay.
most newer cars work this way.
but if you buy the FSM for your car, its all there. read it.
hot wire the fan, does it work>
test the fan relays are they good.
if yes, then it gets more hard.
on our cars we attach a scan tool to make sure the ECT even hits the
spec.temp, hot idle parked.. It must.
Where is the sensor located for the water coolant
you can get guide from many sites.. i know few
error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, com plete refurbish, repair, installation every single thing is covered
within seconds u can get the access and it's totally illustrative complete
407 6 speed auto transmission is slipping
The best solution you'll get from books at
www.reliable-store.com
These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc
Not finding what you are looking for?