20 Most Recent 2005 Nissan Patrol Questions & Answers

Find the fuse box by driver door side

if you have 2 fuel gauges working of a tank switch there may be some resistance in the circuit of the second circuit that increases the reading of the gauge. Personally I have the tanks balanced out with a levelling hose between them the the gauge reads the capacity left in the tanks IE full-- both tanks-- full, 1/2 both tanks 1/2 With the way you have it set up then if one gauge is faulty and shows full when it is empty you can find yourself in a spot of bother when you need the other tank

hi Gerard this is what you looking for good luck

That could be caused by anything from engine or transmission control problems to broken engine or transmission mounts. I would recommend taking it by your local auto repair shop and having one of the techs drive it to give you a better idea of what could be causing your problem.

This is not a model that we know in North America. Your local dealership will have one, or you can order online. This link should find sources near where you are. https://www.google.com/search?q=2000+Nissan+KA24DE+replacement+Vehicle+Speed+Sensor ..

I need code for this serial, same radio, Thanks PP2787HB 0091600

The firing order for the Nissan Elgrand equipped with the VG33E engine (1999 model) is 1-3-4-2, starting from the front. Nissan 3.3L (199 cu in) firing order - diagram & guide ' REREV

It could be numerous problems - consult a reputable shop - you need someone that knows what they are talking about to physically look at the car to solve the problem - will save you a lot of time and expense. ????

Probably the fan got blocked with some debris and caused it to draw too much power, that caused the fan controller to fail. Or, the fan controller has failed, has a bad connection etc. Check the cabin filter if it has one, for a blockage.

Hello, Malcolm. It seems like you are facing an issue with the alarm system of your Nissan Primera P12 from 2002. Based on the symptoms you've described, it does sound like there might be a fault with the alarm system or the central locking mechanism. Given that you have already tried a few troubleshooting steps such as disconnecting the battery and replacing the micro switches, it might be a good idea to further investigate the alarm system itself. Since the hazard lights are flashing without any audible alarm sound and the central locking is behaving inconsistently, there could be a fault in the alarm control unit or wiring. One possible cause could be a faulty alarm module or a loose connection in the wiring harness related to the alarm system. It's also worth checking the condition of the alarm siren to ensure it is functioning properly. Considering that the issue seems to have improved after disconnecting and reconnecting the battery, it's possible that there is an intermittent fault related to the power supply or a reset of the alarm system. If the problem persists, it might be best to consult with a professional mechanic or an auto electrician who can perform a more in-depth diagnostic test on the alarm system to pinpoint the exact cause of the issue. In the meantime, if you experience the hazard lights flashing again, try to document when and under what circumstances it occurs. This information can be helpful in diagnosing the problem more accurately. I hope this information helps, and I wish you the best of luck in resolving the issue with your Nissan Primera P12. Feel free to reach out if you need further assistance or have any more questions.

To remove the starter motor on a 1994 Nissan Bluebird SSS 2 litre ATTESA-U13 engine (AWD), follow these steps: 1. Disconnect the negative terminal of the battery to prevent any electrical accidents. 2. Locate the starter motor, which is typically located near the transmission bell housing on the engine block. 3. Remove any heat shields or other components that may obstruct access to the starter motor. 4. Disconnect the electrical connections to the starter motor, including the wiring harness and solenoid. 5. Remove the mounting bolts that secure the starter motor to the engine block. 6. Carefully slide the starter motor out of its mounting position and set it aside. 7. Install the new starter motor by reversing the removal steps. As for finding a repair manual for your Nissan Bluebird SSS, you can try searching online for a digital version that you can download, or you can purchase a physical copy from a reputable auto parts store or online retailer. Additionally, you may also be able to find helpful information and step-by-step guides on online forums and websites dedicated to Nissan vehicles.

Has the Throttle body been removed and cleaned thoroughly both sides? Was a Throttle body relearn done afterwards. https://www.google.com/search?q=2018+Nissan+NP200+8v.+Throttle+body+problem Ideally you need an auto electrician to check for Diagnostic Trouble Codes and do a full system scan with a pro grade scan tool computer. It can also do the relearn and check the IAC. https://www.google.com/search?q=auto+electrician+near+me ....