20 Most Recent 2001 Nissan Almera Tino - Page 9 Questions & Answers


So, you did not have the welding done with gas, but with electric arc.
Anytime a person welds on a car with anything electric, the car's owner must disconnect ALL things electrical, or everything may be toasted, as yours is.
The alternator is a self-contained unit, and it either works or doesn't.
The alternator has the voltage regulator inside as a part of it.
I believe you may be needing an ECU, which is the brain of the car, however, because of the damage caused by an uninformed person, your car may never be fixed, because some wires may have shorted out (melted together) inside on of the wire harnesses that are all over your car. I think the best you can hope for is that it runs, and the alternator charges the battery as needed. I think the alternator is supposed to put out about 13.1 volts.
If you look up an ECU on e-bay, you will notice there are repair services who can repair your ECU. I have used them several times, and this has worked well for me.
Sorry.
Be blessed.

Nissan Almera... | Answered on Jun 26, 2014


You don't say what kind of welding you had done or where but I can tell you that if it was a MIG welder or an ARC welder and they didn't take the appropriate precautions this could very well messed your car up and ruined the ECU.Your alternator should be charging from 13.2 to 14 volts.Check the ground on the battery to make sure you have a good circuit. The fact that the car will start is a good thing.I would go looking for a bad connection or wire controlling the gauges.The voltage regulator is in the alternator,it controls volts output. I'm jumping around here a bit but I empathize with you in a big way.Go back and double check everything.There must be a fuse to the instrument cluster,or perhaps a bad wire. good luck

Nissan Almera... | Answered on May 08, 2014


Disconnect the battery overnight and try again.

Nissan Almera... | Answered on Mar 21, 2014


chech with nissan experts.

Nissan Almera... | Answered on Dec 28, 2013


Count flashes and pauses. The flashing light may be telling you a code.

Nissan Almera... | Answered on Nov 10, 2013


the gear mech is broken

Nissan Almera... | Answered on Nov 04, 2013


how can i find the cure p16ff i very rid of this problem

Nissan Almera... | Answered on Oct 29, 2013

Not finding what you are looking for?
2001 Nissan Almera Tino Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Almera Nissan

  • Almera Nissan

Most Popular Question

petrol filter 2002 nissan almera

  • Cars & Trucks
Loading...