20 Most Recent 2001 Nissan Almera Tino - Page 7 Questions & Answers

yes the best and most reliable is a commander make and if you have a nissan dealer fit it it will not affect any warranty for the vehicle

Can you share more detail information about this noise ? How often does it happen ? When does it happen (turning) ? The more details you add, the better we can assist you with your possible problem.

Check power feed or ground for intermittent connection. Also, check the motor brushes - worn brushes will not make proper all the time contact with commutator resulting in intermittent operation.

take car to a nissan service centre with its vin number they will have the code on record

which year looks like all the radios need some slid down each side of the radio that releases clips to extract the factory radio Nissan Almera radio fit

ok, i will try and help you as much as i can. first you should be getting 12 volts a pulse and a ground( negative ). if you're getting the 12 volts and the grounds but no pulse the the car has 2 sensors, one is the cam and the other is the crank. those sensors provide pulse to one for the injectors and the crank is for the coil packs. you can test for pulse by using a noid light or the normal test light. just connect the test light to 12 volts terminal and have someone crank over the engine. if you don't get a low flickering light then you neeed to change the sensor

Nissan Almera get your car fix right now

you really should have removed throttle body to clean properly. The fuel intake system is probably full of the cleaner and other crud now and you might get it started by holding pedal to the floor, while cranking. press the helpful button.

sound like a safety system to prevent unwanted people to enter the car. many places have cheeky theft problems from cars

Most vehicles with timing chains have a cover over the chain that it attached to the oil pan. There are gaskets that have to be replaced between the two and removal of the pan is recommended to do this properly. Trying to avoid it can result in a number of issues, from gasket material falling into the sump to oil leaks from not having the lower part of the cover sealed properly.

year/make/model will be needed for help