20 Most Recent 2005 Nissan Almera 1.8 Questions & Answers

0helpful
1answer

My nissan almera tino ignition key comes out with the engine running and every thing works like the key is in??

The tumbler is probably worn. The best best is to leave as is or to visit your local automotive parts store to get a new one
2/17/2015 11:37:00 PM • 2005 Nissan... • Answered on Feb 17, 2015
0answers

How to use

Be the first to answer 8/17/2014 3:00:37 AM • 2005 Nissan... • Posted on Aug 17, 2014Be the first to answer
0helpful
1answer

Ignition wont start engine, NATS clicking

Check for loose or bad battery cables.
3/18/2014 4:28:07 AM • 2005 Nissan... • Answered on Mar 18, 2014
0helpful
1answer

Almera 1.5 2004

Check your blower motor resistor,it's located next to blower motor,2 screws hold it on with electrical connector,under glove box.
11/27/2013 2:22:28 AM • 2005 Nissan... • Answered on Nov 27, 2013
0helpful
1answer

I have a weird noise coming from under car when in gears 1 and 2 and accelarating

i'm guessing it is a manual trans. It could be any number of things,but u might want to check oil level. Need to get it up on ramps or something and look for anything that could be loose, like plastic shields under car,be very careful when getting under a car
7/10/2012 9:44:55 PM • 2005 Nissan... • Answered on Jul 10, 2012
0helpful
1answer

How rest limp home mode

HelloThe engine and transmission in this cars drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL THE DIAGNOSIS & TESTING IS COMPLETED.

7/6/2012 9:16:08 PM • 2005 Nissan... • Answered on Jul 06, 2012
0helpful
1answer

Oil light goes on and off

That's really bad ... First of all check oil level when its cold... The clanking sounds are your valves running dry. This will cause massive damage the heads. If you oil is low fill it back up & check the engine for leaks & hope there is not valve damage. If the oil was low and you filled it & you still get the clanking noise the valves are permanently damaged & the head/heads & valves will need to be replaced.. Big costs
2/6/2012 7:08:51 PM • 2005 Nissan... • Answered on Feb 06, 2012
0helpful
1answer

Oil light flashes on and off

Your description sounds serious. The next step is to check the oil level, then check the oil pressure with an external gauge. If the pressure is low, the news is not good and you need to disassemble the engine until you find the issue. The clanking does description does not sound good.
2/5/2012 6:59:45 AM • 2005 Nissan... • Answered on Feb 05, 2012
Not finding what you are looking for?
2005 Nissan Almera 1.8 Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Almera Nissan

  • Almera Nissan

Most Popular Question

nissan almera tino ignition key comes

  • Cars & Trucks
Loading...