20 Most Recent 2004 Mitsubishi Galant 3.8 Questions & Answers

Yes. A/C with force both fans on. Otherwise one will only turn on if the coolant temperature is high enough to trigger the coolant fan sensor.

It is on a keyed shaft. See the link on Just Answer. It only needs to be removed if it is bent or damaged. https://www.google.com/search?q=2001+mitsubishi+galant+2.4+replace+reluctor+blade ..

What's the firing order for a 1998 mitsubishi legnum vr4 2.5 v6

Too many reasons to list on your mystery vehicle. Google year make model no spark

4 spark plugs.

I would have your exhaust checked. You might have a plugged up catalytic converter. Most shops will flow test the cat for free.

Mitsubishi specific trouble code P 1715 = Pulse Generator Assembly.

Could be a plugged fuel filter. You crank on it for a while and won't start, all the time pressure is building on the fuel against the blockage, you stop trying for a while. When you finally go back and crank on it some fuel has gotten past the blockage and it starts. Then will keep running because the fuel is now moving. If this isn't the case, after you replaced the fuel filter, then it isn't getting power to the fuel pump at first meaning there's something amiss in your fuel system. Possible an electrical sensor that tells the pump to come on when the switch is first activated.

http://www.mitsubishi-motors.kiev.ua/Manuals/Engine/pwee9067/11B.pdf this will give the valve clearance as well

The best solution you'll get from books at www.reliable-store.com These are books containing info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicle- cars, atv, trucks. forklifts, boats, excavators etc.

new fuel filter possibly or may need new fuel pump

I know this website www.reliable-store.com that i get manuals from, and they have all models online that solve all simple/technical problems like professionals I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

At www.reliable-store.com get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams, torque specs, error codes, everything.

Follow the link http://mmc-autoelectric.org.ua/manuals/eur/pajero/2009/52/html/M152402070034700ENG.HTM

The jerk is from misfire. Start at the top - check plugs or just put a new set in, check all coil packs and wiring, make sure you have correct fuel psi on fuel rails.

check fuses and connections and hot wires.