20 Most Recent
2008 Mini Cooper S - Page 2 Questions & Answers
Not hitting full boost
Get a code reader and read the ecu (Engine computer unit). If codes pop up, that's what will need fixing...
Swapped seats but heat not working - f56 mini cooper s
Are the connectors actually wired the same? Check the wiring diagrams for each seat if you can find them, otherwise trace the wiring from the internal components in the seat to the connector and make sure the heaters are going to heater power pins in the original harness, and temperature sensors are going to temperature sensor pins (temperature sensors may be polarized, that is, it makes a difference which pin goes to positive and which to ground).
Why does the yellow engine light come on and go off with times? I am driving a Mini Cooper S, 2010 Model
To be sure you need to hook up a scanner and read the code when you see the light on. It's not unusual for Mini's to do this for a couple of usual reasons. One is due to the Oxygen sensor getting a short term reading that is out of the norm causing the light to come on. Various things can cause this including Injectors, mechanical condition, o-rings, even fuel changes from one station to another can trigger this on cars. It goes off later because it's a temporary issue and the car adjusts itself after so many starts. One other reason is the fuel cap not being tightened properly, that usually is fixed when you refuel and retighten the cap properly or just tighten the cap.
2003 Mini Cooper S Electrical issues
Check all fuses. Inspect all the wiring you can see. If a mouse chewed them up, maybe it could cause this?If that doesn't fix it, sounds like you have a defect in the circuit board in the Instrument panel display.
Not finding what you are looking for?