20 Most Recent
2006 Mercury Mountaineer AWD Questions & Answers
2006 wrench light is on
Powertrain Malfunction (Wrench) Warning Indicator (base instrument cluster)
The instrument cluster receives the powertrain status from the PCM over the high speed CAN. When a powertrain system concern is detected, the PCM sends the instrument cluster a command signal to illuminate the powertrain malfunction (wrench) warning indicator. If the 4WD control module detects a failure with the 4WD drive system, the 4WD control module sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator. On 4.6L engines, if the transmission control module (TCM) detects a failure with the transmission, the TCM sends a message to the instrument cluster over the CAN to illuminate the powertrain malfunction (wrench) warning indicator.
better have it checked !
Bett
Right and left brake light
Have you tried replacing the bulbs? The two side lights run through the turn signal switch so if they aren't getting power, chances are your signal switch is bad. Do your front blinkers work? Do the rear lights come on when you use the blinkers or the hazards?
11/19/2021 9:03:34 PM •
Mercury...
•
Answered
on Nov 19, 2021
Safe mode on 2004 mountaineer
Take it to a qualified repair shop , you don't have the diagnostic knowledge or tools to fix this , just because you can read codes doesn't mean you can diagnose an fix it ,
2/3/2019 9:27:34 PM •
Mercury...
•
Answered
on Feb 03, 2019
Not finding what you are looking for?