20 Most Recent
2004 Mercedes-Benz ML 350 Questions & Answers
What does the wrench code -376 d mean on a 2004 ml350
The maintenance service indicator notifies the driver when the next service is due. Approximately one month before the maintenance service is due, the type of maintenance is indicated in the speedometer display. If one large wrench is shown, a minor service (A) is due. Conversely, if two small wrenches are shown, a major service (B) is due. The value shown in the display may reflect the calculated distance (in miles) or time (in days) remaining. When the maintenance service term has been exceeded, this value is preceded by a "-" (minus symbol). You can read more about Mercedes-Benz maintenance service indicator lights here: https://www.yourmechanic.com/article/understanding-mercedes-benz-active-service-system-assyst-assyst-plus-assyst-fixed-intervals-maintenance-reminder-by-brent-minderler
10/6/2022 1:06:36 PM •
2004...
•
Answered
on Oct 06, 2022
The rear drivers side passenger seat in my Mercedes 2004 ml350 is stuck down...how do get it to come back up.
Not an easy task. You likely have one of 2 problems. If center seat belt is in the seat that is down, it may be locked. If so, you need to remove the seat back cover then the seat belt retractor. You can then position the seat belt retractor upright (how it sits when the seat is up) and pull the seat belt out making slack to raise the seat. This only happens if the either the stop on the seat belt is broken or the seat belt guide on the seat back is broken. If that's not the problem, you likely have a release cable that has come loose under the seat. If you look at the half that works, you can determine what you need to move on the locked seat and try to get to it with a long tin screwdriver or similar implement.
3/2/2015 6:57:24 PM •
2004...
•
Answered
on Mar 02, 2015
2004 ml350 wrench code 2d what is it
Hello, The Wrench is telling you that your car is due for Service, Simply an oil change and some inspections are due. The 2D means that the service is due in 2 days. Hope that helps, You can go to a Mercedes dealer but they are way over priced, I would recommend finding a local independent Mercedes shops. Usually they are run by Technicians who worked at the dealers anyway. Just FYI.
11/25/2014 7:25:26 PM •
2004...
•
Answered
on Nov 25, 2014
2004 ml350 wrench code 25d what is it
It means that your car will want service in 25 days. I'm guessing you don't put a lot of miles on your car. The MB Assyst system will request a service every 365 days or 13,000 miles, whichever comes first.
11/25/2014 7:14:52 PM •
2004...
•
Answered
on Nov 25, 2014
Engine sounds not normal when running
I need more information. Most of the newer engines have an engine knock sensor on the engine to let the computer know there is a knock. If it is just a strange noise, no check engine light, then it could be a fan belt, an alternator bearing, an idle bearing on the fan belt. I need more information. When does it do it, all the time? What does it sound like?
10/12/2014 4:03:40 PM •
2004...
•
Answered
on Oct 12, 2014
How do i remove a rear door panel from a mercedes 2004 ml350
the motor may be turning but i expect the control wire's have frayed or snapped,you will need to replace the complete window regulater component , for now jam the window in the up position with some cardboard folded over so it squeezes in the window channel and against the glass , this will keep the window from sliding down , you will need a mechanic to replace the regulator , dont touch the switch anymore as you may get the window down but not be able to push it back up , keep me posted if you wish
7/19/2014 6:21:51 PM •
2004...
•
Answered
on Jul 19, 2014
After removing the battery head for my 1999 ML 350
The code should be on a card that came with the owners manual. Usually everything is located in the leather case assuming the procedures are the same there as well as other locations. Otherwise, you will have to call the dealer and provide them with VIN and what other information they request for proof of ownership.
10/20/2013 12:07:40 AM •
2004...
•
Answered
on Oct 20, 2013
Misfire on cylinder 3
Check the coil to that cylinder, u can change it out with another cylinder if the problem follows replace the coil if it doesnt change it may be in the wiring to the coil but at also may be a dead cylinder. If i can help further let me know
4/11/2013 11:09:18 AM •
2004...
•
Answered
on Apr 11, 2013
Not finding what you are looking for?