20 Most Recent
2003 Jensen SV-8 Questions & Answers
Alpine tdm9501r
ask the parts guy at the dealer for the # and a picture you may be able to make one easy
Manual for a jensen 300 watt power inverter
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwj51Nbc4ryCAxW6gf0HHVt2DfQQFnoECBAQAQ&url=https%3A%2F%2Fwww.purkeys.net%2Fwp-content%2Fuploads%2F2019%2F05%2FInverter-300-Watt-User-Guide.pdf&usg=AOvVaw1BAYGo2bHmol735LGv6PgN&opi=89978449
After market stereo in 1997 eddie bower ford expodition provides no sound
You should be using line out from your aftermarket stereo if using the vehicle's existing amp. Then again, you may choose to bypass it, depending on the power being put out by your new stereo.In both the Expedition and Excursion, the sound systems are different than smaller Fords. The Eddie Bauer typically had the Premium sound system, and the wiring can get tricky with those. You want to make sure it's done right so you don't short out and damage the amp circuit in your new stereo.If all you're using is the existing speakers, then go ahead and bypass.
Engine Malfunction, starter pulley jammed.
All questions in Cars and Trucks need 'year make model' please.But this could be a generator, chainsaw, leaf blower or mower in which case 'make model (what is is).On a vehicle, remove sparkplugs and try and turn the engine by hand using the big nut on the crankshaft pulley. Broken timing chain or belt and the piston is hitting the open valves. However, NO cars have a starter that has a belt, they are gear driven...
2013 Cherry Tigo 2.0 TXE loose power when driving and come to a standstill. Engine cranked but does not start. What can be the problem
Try to diagnose the issue. That said, a professional mechanic with the diagnostic tools is likely needed.
Restart the Vehicle: First, shut off the engine, wait for about 10 seconds, and then restart the vehicle. Sometimes, this simple reboot can reset any signal errors that might be causing the "reduced engine power" warning light. It's still a good idea to have a mechanic check it out.
Since you've already changed the battery, it's essential to ensure that the new battery is functioning correctly. Check the battery connections, terminals, and cables. Also, inspect the electrical system for any loose or damaged wires.
Fuel System: Verify that there are no fuel-related issues. Ensure that the fuel pump is working correctly, and there are no clogs or leaks in the fuel lines.
Ignition System: The ignition system plays a crucial role in starting the engine. Check the spark plugs, ignition coils, and ignition control module. Faulty components in this system can prevent the engine from starting.
Air Trapped in Cooling System: As suggested in one of the solutions, make sure there's no air trapped in the cooling system. Bleeding the air out can help maintain proper engine temperature and prevent starting issues.
Remember that driving with the "reduced engine power" warning light on is not recommended.
On my Fortress 2000 the turn signals not working every thing else works
this is no car it is Mobility scooter , right? electric scooter. tiny.
be does the hazard switch work right or not. test 1
test 2 all fuses good
now working means what?
all 4 or more turn lamps dead.? or stuck on, or some work or not?
only left or right or only front or rear fail?
this answer is for cars, posted to cars. and trucks.
test 3, remove all bulbs and test them 1 by 1, in the car. (lamps can in fact short out)
Not finding what you are looking for?