Hi
The seat slides up, when everything is free. Four screws at the bottom. You have to remove the plastic seat belt trim covers at the top of the rear seat squab first, and the plastic roller guide beneath. Use two pocket screw drivers on the trim, one to depress the plastic retaining clip on the top as you gently pry the cover up from underneath it. When both of the two retaining clips are released, carefully remove the cover straight up or you will break off the two locating tabs on the rear side. Then pry up the white plastic roller guide to release that two.Unbolt the three rear seat shoulder belts at the bottom anchor point. Then lift up really hard on the rear seat squab to disengage it ai the top. Sometimes you have to squirt some Armor All or whatever into the seam, and try to spread it apart with your fingers or other soft tool: heat bakes the rear parcel shelf cover and the rear seat squab, and sometimes they are pretty well stuck together. Raise the squab above the shoulder belt reels, feed the belts through the cutout in the seat, and it's free of the car.
Please get back to us if you have further query else please accept the suggestion.
1 questions posted
Usually answered in minutes!
45 Questions
17 Questions
11 Questions
12 Questions
4 Questions