2010 Hyundai i10 1.2 - Answered Questions & Fixed issues
WhY is Orange exclamation mark on in hyundai I10
This is your "
Low Tire Pressure" warning light. Check the tires for proper inflation. If all the tires have the correct amount of air, then more than likely, there is a faulty tire pressure sensor. These sensors are mounted inside the tire as part of the valve stem. You will need to find a shop that has a scan-tool that can read the outputs from these sensors to find which is faulty.
http://electronicshelponline.blogspot.com/
How to fit a nearside wing mirror to a hyundai I10
Call the Auto Glass Experts at Mobile Glass Inc 1-800-872-1452 and give them the Year , Make and Model and they will ship the correct Mirror glass to you! Glue the new glass over the old one and your done.
Hyundai i10 Steering not rotating. It seems to be locked. Pls help
Faulty Steering?
It was not until later in the day as I check the Internet for "hyundai i10" "steering locking" that I started to worry once again. I found reviews and comments mentioning that the i10 had problems with its power steering system which sometimes caused locking while the car was in motion! This post about
hyundai i10 steering locking is what really caused me to get worried again. I still puzzled a bit and not sure if that was the same case as mine as in my case the locking took place while the car was at a stand still and turned off. I'll try to follow up on this carefully to see where it goes. Perhaps I should mention this issue to the agency as they service my car after the first 1000 miles (or first month of driving it).
Update: After describing the problem on an
Arabic cars forum I learned that nothing was wrong with my i10. The steering locking was normal since I tried to move the steering too much while the car was turned off. As for the key not turning in with ease, the reason was that I must have moved the steering slightly after inserting the key and before turning the key. This is the method used for turning the key whenever the steering has locked. Man, I just love those forums and i LOVE the Internet.
Which fuse protects the interior light Hyundai i10 1.2 comfort
hi I have a hyandi i 10 2013 I am trying to fit a remote central locking . But I am having trouble with what wires to connect to where.the remote wires are black pink white green,yellow and purple. and on the switch there is only orange,black,green and brown. I would be greatful if you could help. Thanks Graham
2016 Hyundai i10. Should both fog lights come on when side lights switched on?
Question edited for clarity.Question moved to model category.Duplicate questions x 2 deleted. Refresh page to see your post.No, low level fog lights are for use in fog only to reduce glare back to the driver. You have one bulb that need replacing on the offside and you need to turn them off on the lighting stalk. Also as you have the U.K. version make sure you only use the high intensity rear guard light when visibility is 500 yards or less. I live in Canada now and people with European cars (Volvo, Mini, Fiat) have no idea when to use them and blind other drivers on the motorways in clear weather.Page 146 of the manual - Section 4-69.OWNER'S MANUAL
hyundaimotors.co.ilhttps://www.hyundaimotors.co.il > i10-engThis manual applies to all Hyundai models and includes descriptions and ... Page 8-6 in the Vehicle Specifications chapter of the Owner's Manual.452 pages..
Valve clearance Hyundai i10 4 cil. 1.1 l
The valve clearance specifications are as follows:
• Engine coolant temperature: 20°C [68°F]
• Limit Intake : 0.10 ~ 0.30mm (0.0039 ~ 0.0118in.)
• Exhaust: 0.20 ~ 0.40mm (0.0079 ~ 0.0157in.)
Also, look at your car's owner's manual ato figure out how to check your valve clearance once you've put about 60K miles to it, and there it will also tell you what the specifications should be.
Hyundai i 10 1.2L 2014 fog lights not working. How do I proceed
If the fuses are fine I would pull the bulbs out of the fog lights and check them to see if they are burnt out you could also use a test light on the bulb holder turn the fog lights on in the vehicle take test light and test both tabs in the connector one should have power and other side will not if bulbs look good and there’s no power coming to the bulb connector the switch might be bad or could have a break in the wires coming from the switch. Hopefully this will help
How to adjust rear brake and handbrake on Hyundia i10
look in your centre console between the seats and remove the bottom of it this would usually just pull out then there should be the end of your handbrake cables with a 10mm adjustable nut that you can get a spanner on ,obviously make sure your car can not roll and release your handbrake wind the nut in a couple of turns then try your handbrake ,keep doing this until it reaches your desired height
Hope this helps Nick
Not finding what you are looking for?