20 Most Recent 2006 Hyundai Getz 1.4 Questions & Answers

Question edited for a lot more clarity. Question moved to model category. 'overrun'? You mean over rule, over ride, bypass? That sort of thing? Overrun means to make it work faster than it is now. You can't bypass modern car immobilizers. They are there to stop exactly what you are trying to do. There are 3 computers and a number of sensors making sure the vehicle isn't stolen or driven away. You have to fix the problem, not find a way around it. https://www.google.com/search?q=auto+locksmith+near+me ..

Question edited for clarity and full 'year make model'. Question moved to correct category. Did you disconnect the battery when you did that work. That would mean the security needs to be reset. They seem to have a history of not starting though!! https://www.google.com/search?q=2006+hyundai+getz+immobilizer+reset ..

I need torque settings on hundai getz 1.4 Mains and big ends

Based on all the info you have provided I think you need a professional to get involved here, I am not willing to "GUESS" what might be the issue or issues (more likely more than one). Good luck

A Dealer Reset Is At Hand ! To Clear Errer Code

Yes there is.

Go to the Hyundai customer registration site and you can access the manuals that tell you how to do this bulb replacement. After you register click the "Manuals and how-to's" Owners Home

You do not say whether it is auto or manual, but I assume manual, and by the sounds of it the clutch is slipping due to wear. There is a test you can do. Start the engine, put it in 3rd gear, apply the foot brake, and let the clutch out. The engine should promptly stall, and if not, you need a replacement clutch. .

With all respect, my Hyundai has a similar problem and it appears to be an over-voltage problem. If you can access wiring diagrams, do so and verify all is OK. Particular attention to the quality of earthing is reccomended, as this can cause voltage issues.

A wheel bearing maybe, or in a manual, the gearbox first motion bearing. Another candidate is the differential, but in a FWD car this is usually nothing to worry about.

Either a dirty fuel filter and/or air filter will normally cause this problem.

the injectors could be melted best to take it in and have it done

replace bulb