20 Most Recent 2007 Hyundai Getz 1.4 Questions & Answers

look at master or slave clutch cylinder

Torque settings for what?

The engine seems to be eating up oil. The piston rings may be busted. You may have to have a mechanic check it out for you.

might be worn out clutch plates

in the gear box

A misfire condition will trigger the malfunction light to come on. Other engine malfunctions will do it too. Have a diagnostic meter connected to find out how many codes are generated so you will know what other problems may be happening.

The sensor that indicates the car that the ABS os blown out is broken. The ABS itself probably has no problem, you need to replace the sensor that tells the car if the ABS has been used or not. But you may also just visit a mechanic and he will replace it for you.

THE SWITCH EITHER BEHIND ONE OF THE KICK PANELS INTHE FRONT OF CAR OR INTHE SIDE PANELS INTHE REAR NORMANLLY IT WILL HAVE A PUSH BOTTON ON TOP TO RESET IT

i have same problem. 50KW max, gas consumption 18 litres plus...

Yes, they are.

try checking the ground circuit for the headlight. this is usually what causes a dim headlight.

Sorry but you have internal problems, when your belt broke it caused contact between the valves and pistons. The cylinder head will need to be removed and inspected what damage has been done.

Your car will have a sticker on the hood or the engine with all the specs you need,