20 Most Recent 2005 Hyundai Elantra GLS Questions & Answers

There are several reasons this could be happening.could be engine or transmission mounts are bad,could need a tune up possible idle control motor,how does the car run going down the road.

Most likely the hand brakes / parking brakes are stuck.

I had something similar with two seperate vehicles after replacing everything I could think of it turned out to be a bad bearing in my alternator on both vehicles.

That indicate that the system is running too rich for some reason that has to be determined. Pull the vacuum line off the pressure regulator to see if there is any fuel in the line to indicate a bad regulator.

are the 2 heater core hoses getting hot.

look on there web site or google it

Question edited for clarity, correct spelling of model. Question moved to model category. It could be so many things. Find a local auto-electrician, a professional grade scan tool computer will diagnose all the electronics computers, modules and sensors in 30 minutes. https://www.google.com/search?q=auto+electrician+near+me ..

some cars the dash has autodimmer a sun sensor on the dash some can be disabled , so read the users guide to do that. most cars, we can disable the out dim in the free users guide, search word DIM. bingo,? see on,off ,up ,down or auto?> find the top of dash sun sensor shine a very bright light there, and dash DIM goes full bright, if yes, bingo see the users guide in the glove box yet page 5-42 is your answer see the words obstructs either sensor bingo it is in your manual this. https://www.carmanualsonline.info/hyundai-elantra-2022-owners-manual/?srch=dim

This usually indicates a problem with the transmission control module (TCM). You should have a qualified mechanic inspect and diagnose the problem, as it could be something as minor as a faulty TCM or something more serious such as a transmission failure. Replacement of the TCM or other components may be necessary to fix the issue.

My 2005'hyundia Tuscan no ac no heater no defrost new blower motor and new resister still nothing

Your alarm is activated and deactivated by the use of the FOB...

Think about it this way; If you have a house alarm, does it turn off by itself just because you opened the front door? No, of course not, you need to then enter the code to deactivate the house alarm.

Same thing with the FOB, it cancels the alarm.

buy the shop manual and read. or online at mitchill1 diy, do com, pay $20 like we all do, what is this, no one problem stated , did you mean the truck hatch springs failed, what? install trunk torsion

a car.all cars made have service manual. every one.and all that is covered even a 3 inch think book.why not buy one from maker.or tell what country you are in .cars are not the same at all , in all countriessome have 5 or more engines choices and transmissions.check out Europe to learn that.nor did you say what is to be worked on, to torque.buy the book or if in USA read it here, at mitchell1 DIY onlinehttps://eautorepair.net/Marketing/Default.aspbuy the book at the dealerpay on line or google all week long.

Use a good scan tool which should identify the failing sensor/circuit when the vehicle stalls,so you can do the correct repair.

Question edited for clarity to get rid of all the abbreviations. The code P2626 won't go unless you do some corrective work to the Heated Oxygen Sensor and associated wiring. https://www.google.com/search?q=2007+Hyundai+Elantra+GLS+code+P2626 videos as well https://www.google.com/search?q=2007+Hyundai+Elantra+GLS+code+P2626 ..