20 Most Recent
2008 Hyundai Accent 1.6 - Page 4 Questions & Answers
P0300 engine code on a
Take it into a shop before damage occurs to the cats. Is that really the only code? Sounds like it might be a fuel issue but definitely get it looked at asap, cat damage can be a lot more expensive than some quick maintenance
Drl fues location 2010 accent
The what? Fuse? If so, it will either be in the fuse box under your hood or mounted on the driver's side firewall of your Hyundai.
Have Hyundai Verna Diesel model
I think you should buy repair manual first for your vehicle after that it will be easy for you to solve the problem. Check the link may be you will find something useful here
Hyundai
I have a 2001 hyundai accent, sometimes it loses power whilst driving and recently it just turned off whilst driving
Sounds like a wiring issue from the body to the fuel pump in the gas tank or the fuel pump itself but my guess is a wiring problem there or close to the ECM (computer) inspect the wiring and harness for lumps in the wire or broken wires or corroded connections.
try running a new ground wire from the battery to the Engine and the body of the car - a simple task . then run a ground wire directly to the gas tank but dont make any holes in the tank or weld upon it lol.
I own a 1996 Petrol
if it turns over and runs in the start position but stops in the run position, the problem is in the ignition circuit to the coil/s
That can be
1--failed resistor in that circuit ( lowers the 12 volts to 7.5 volts for the coil/s in the run position)
2-- faulty ignition switch not keeping contact in the run position
have an accredited auto electrician determine what is the fault
Hi we have a 1.3
there were no efi engines in 54 so guessing that it is either a 95 , 04 or 14 plate plater vehicle
run the fault codes to determine the exact fault
most probably the EGR system that is faulty
Not finding what you are looking for?