20 Most Recent 2006 GMC Sierra 2500 Questions & Answers

By far the easiest way to do this is to go to Crutchfield.com. They will take your vehicle information, tell you what speakers will fit in you door(s), provide you with detailed instructions on the procedure to remove the old speakers, give you any adapters or spacers necessary for the new speakers. It doesn't get any easier than that.

Here is a youtube video , it's easier then me trying to right the steps down ! How To Install Replace Remove Door Panel Chevy Silverado GMC Sierra 03 06...

this is something that would be best done by the dealer due to the airbag being in the steering wheel , that being said if you wish to attack this on your own still you have to unplug any power [battery, back up battery, stereo amps stiffening capacitors etc] then there are some small screws on the back of the steering wheel that need to come out before the horn/airbag assembly will come out to allow you to disconnect and replace the steering wheel switches depending on the accessories on your truck you may also need to remove the steering column covers before you can acess the scews in the back of the steeringwheel. be VERY cautious of the airbag connectors and wires but you would still be safer and better off letting a dealer change those out for you.

Have you replaced the actual switch panel mounted in the door? If everything else works directly with their own switches it could be the switches you use whilst driving.

sounds dumb but here in maryland people with older vehicles have problems passing emissions test. sometimes fresh oil change can help also possibly vehicle is in need of a tune up including plugs wire cap rotor pcv valve and fuel filter. one other thing could be the catalyst converter might not be cleaning to its full potential. hope this helps

The head light adjustment screws are at the back of the headlight under the hood.

Fuses shouldn't 'light up', fuses melt, lights light up. I am very confused. Some general help in the link. https://www.google.com/search?q=ctsy+fuse ..

Door switches or wiring.A scanner would help tracing the problem.

What is the torque for a 2007 Saturn ion wheel hub assembly

Question edited for clarity. You need a good auto electrican with a $5,000 pro grade scan tool computer to diagnose. Your issues are electrically caused, not mechanical. 'Local mechanics' don't buy the fancy scanners.

ABS sensor wiring became disconnected?

check fuse relay wiring and switch and if lighter kept blowing fix dont throw in bigger as you see could have burnt truck down

Called 'Limp Mode'. Connect to a code reader and it will tell you why.

Find USA Online Jobs (??8000$-??95000$ Weekly) safe and secure! Easy Acces To Information. Simple in use. All the Answers. Multiple sources combined. Fast and trusted. Discover us now! Easy & Fast, 99% Match. open this site .............>>> http://Www.PAYCASH1.com

This means marker light, running light, brake light or blinker. In this case one of the wires will be ground (-) and the other is positive(+). Generally a white and a black wire will be provided. The white will normally be the ground(-) and the black will be the positive(+).

Wheel bearings and struts.

Check the radio instalation for the issue.

PERHAPS IT HAS A RELAY FOR THEM UNDER THE HOOD

Maybe vehicle speed sensor has a problem?