20 Most Recent 2005 Ford Escape Hybrid Questions & Answers

0helpful
1answer

Will the inertia switch trip fuel pump fuse? I am trying to get my car to the bodyshop after having a shock break through rust, everytime I go over a bump the fuel pump fuse trips.

No I have never seen that in 25 years of being a Ford dealer technician. You have a shorted fuel pump is what causes this to happen.
5/14/2016 1:57:43 AM • 2005 Ford Escape... • Answered on May 14, 2016
0helpful
1answer
0helpful
1answer

What is the clicking sound I have while idling. Maybe a valve or ring problem?

Likely a valve. If it only happens when idling, I wouldn't worry too much about it. Most cars do that as they get older.
4/28/2015 8:45:32 PM • 2005 Ford Escape... • Answered on Apr 28, 2015
0helpful
1answer

What is the normal ghead or coolant operating temp tha world report on a Scanguage

the thermostat opoens at 195 degrees Farenheit, so any range from 175-200 also, if your thermostat fails in the open position, you'll set a P0128 OBD-II Trouble Code Read more at: http://www.obd-codes.com/p0128 Copyright © OBD-Codes.com
4/8/2015 4:18:40 AM • 2005 Ford Escape... • Answered on Apr 08, 2015
0helpful
1answer

2005 Ford Escape Hybrid has a knocking/thumping sound. It seams to sound like it is coming from the right front axle. I start hearing it after about 5 minutes of driving. It happens at 35 to 40 mph wh

Check the shocky rubbers are good and tight. Check the tyres for lumps in the side walls and check for tread (belt )seperation
1/12/2014 12:11:10 AM • 2005 Ford Escape... • Answered on Jan 12, 2014
0helpful
1answer

2005 Escape Hybrid Engine Replacement Failure

You will need to go to a dealer for a re flash on the PCM if you have changed it out
12/11/2013 7:43:21 AM • 2005 Ford Escape... • Answered on Dec 11, 2013
0helpful
1answer

FORD ESCAPE PCM WIRING FOR MIDDLE HARNESS.

https://www.google.com/search?q=FORD+ESCAPE+PCM+WIRING+FOR+MIDDLE+HARNESS or take a subscription to www.alldata.com Fuse 11 is MAF on some years, but not all https://www.google.com/search?q=FORD+ESCAPE+Fuse+%2311+keeps+blowing This is the fuse box for 2010, change to your year in the URL and press enter https://www.startmycar.com/ca/ford/escape/info/fusebox/2010 ..
3/31/2024 1:21:05 AM • Ford Escape Cars... • Answered on Mar 31, 2024
0helpful
1answer

Remove lift gate panel 2022 ford escape

Hi, Please first reference the cars manual for the removal process. Then, if need more help, please search for relevant youtube tutorial. And if still need further help, please consult a local mobile mechanic. Thank you.
10/4/2022 8:15:43 PM • Ford Escape Cars... • Answered on Oct 04, 2022
0helpful
1answer

2018 Ford escape. Low beams are not working. High beam , fog and parking lights are all working?

no country told this is a world wide forum, and cars are not the same world wide at all, vast differences. (by laws too) quesiton #2 is this car fitted out with DRL, daylite running lamps>?????????? well fuses are first. check them first we do. then scan the PCM using scan tool (obd2 ,2008 or newer tools)\ USA answer? the PCM will tell you why, the owners guide ,in glove box see chapter fuses/ see head lamps? HL :? fuses,??? OOPS NO FUSES !!! focus , not focus Electric or Focus RS car,. right. the BCM runs the lamps and has no fuse for any pair of lamps it uses electronic regulators to NOT need fuses. 2018 auto lamps. the left and right bcm lamp drivers are not he same driver. so only one side fails. see? F74 fuse blow kills them all up front. 10 lamps dead. so is not this. here is my guess, manual lamps fail low beams. both lamps are bad. or wires cut or shored to them. but no wire can do that, there are redundant wired sides, so both can;t fail by DESIGN \even 2 grounds, left and right not the same. so learn the scan this car every time if fails fore sure now. or test the lamps 1 by1 , unplug them and see if low beams read 0 ohms if not the element it burned out. on both. scan it and see , left right dead lamps low/??????????
10/3/2022 12:49:58 PM • Ford Escape Cars... • Answered on Oct 03, 2022
0helpful
1answer

2001 Ford escape XLT 3.0 liter V6 where is the transmission torque converter clutch solenoid located is it inside the transmission or or on the outside of the transmission

well the tranny service manual covers that but first we need the real transmission name and is it 4wd? well TCC is always 3 place. the outside controller (PCM/TCM) and wire there to . the transmission TCC solenoid.(inside) so I will now answer for the tranny guts. the TC clutch can be bad too, or the piston that drives it. or solenoid (dc volt coil to fluid valve solenoid) Ford box CD4E The Torque Converter Clutch solenoid is part of the solenoid valve body assembly. The solenoid valve body assembly is 142 (labeled Body assembly - transmission control solenoid (TCS)) on the Disassembled View on your Service DVD.(or manual) buy the manual or read this. (keep in mind it can just be a TC clutch bad and no the ACTUAL TRANNY AT ALL, OR TCM IS IN LIMPMODE, NO DTC ERRORS POSTED WHY NOT? $16 BUCKS TOO MUCH https://www.ebay.com/sch/i.html?_from=R40&_nkw=ford+cd4e++ATSG&_sacat=0&_sop=15 ALL YOu can do is (tell all DTCs thrown) and test for voltage on the tranny connector for TCC lock. and if is good you can put in ID 141 part. if fails install a new clutch.(main TC) 141 is the solenoid set, (all in one) 141-undefined-undefined-0.jpg
9/16/2022 9:05:50 PM • Ford Escape Cars... • Answered on Sep 16, 2022
0helpful
1answer

Electronic power steering fails in my 2009 Escape Limited FWD.

Take it to a Ford main dealer for conformation.
4/11/2022 5:57:47 PM • Ford Escape Cars... • Answered on Apr 11, 2022
0helpful
4answers

My ford escape 2013 model wont start after refueling. it starts after about 15minuites then subsequently it starts anytime i start it. the refusal to start problem comes up only when i refuel.

The most common cause of this is the electric in fuel tank fuel pump is sticking due to the introduction of the cold fuel. I would replace the pump.
2/19/2022 5:25:00 AM • Ford Escape Cars... • Answered on Feb 19, 2022
0helpful
1answer

Transmission problem in 2009 Ford escape limited that can be felt in the gas pedal?

Check OBD codes for a clue.
2/6/2022 7:47:05 PM • Ford Escape Cars... • Answered on Feb 06, 2022
0helpful
1answer

2018 Ford Escape. Torque for flywheel bolts on Ford Escape please.

https://www.2carpros.com/questions/torque-specs-1035067 says; OHV 3.0 engine, my info says 54--64 ft lbs. So if you get right in the middle, should be fine. https://www.google.com/search?q=%22Ford+Escape%22+Torque+for+flywheel+bolts ..
2/4/2022 4:03:55 AM • Ford Escape Cars... • Answered on Feb 04, 2022
Not finding what you are looking for?
2005 Ford Escape Hybrid Logo

18 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Ford Escape
2002 Ford Escape

1,139 Questions

2001 Ford Escape
2001 Ford Escape

1,083 Questions

2005 Ford Escape
2005 Ford Escape

1,107 Questions

2003 Ford Escape
2003 Ford Escape

900 Questions

2004 Ford Escape
2004 Ford Escape

559 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Escape Ford

  • Escape Ford

Most Popular Question

ford escape 2005 hybrid replaced brake

  • Cars & Trucks
Loading...