2007 Dodge Magnum RT - Answered Questions & Fixed issues

0helpful
1answer

1978 dodge magnum XE 5.2 ,CARB 2 barrel , lean burn HORROR need to know part on firewall between ballistic resistor and voltage regulator it is orange with 3 wires and has plug in

FIRST OFF , 1978 IS A NO DIGITAL DOCUMENT YEAR. 2000 IS YES. (ON AVG) so only books exist then paper hard bound books, service manual. so buy one used there 44 years old. and now have what you need they be rare. most folks never hand scanned a 1000 page 44 year old book. that be (over the top brave) not me! WOW 1 NO PHOTO POSTED OF THE OBJECT, And gee 2, nobody drives any lean burn car now. ever. wow2 , wire coolers all 3 not told ,now that makes reading schematics to you impossible. wow 3, no problem told is something dead, (i bet yes) but not told. if was told we can look on pages that have 3 devices related to the problem. not told. most of these cars where crushed at the $500 federal, crush program. rare now. super rare. read here (kinda does the job but weak on locations) https://app.chiltonlibrary.com/home
12/7/2022 2:21:21 PM • Dodge Magnum... • Answered on Dec 07, 2022 • 84 views
0helpful
1answer

My Dodge magnum starts making a winding noise when I m going down the road and I have to pull over and put it in park and turn it off and then start it again to make it stop What is it?

limited info generic answer it can be anything --check all fluids for level and condition next time pop hood look and listen for the area of noise and check those components --like steering pump alternator water pump etc
2/14/2022 12:26:48 PM • Dodge Magnum... • Answered on Feb 14, 2022 • 40 views
0helpful
1answer

Rebuilt 2.7 engine 2008 Dodge magnum se, throwing PO325 Knock sensor, PO 402

TRUST YOUR MECHANIC
1/1/2022 12:47:52 PM • Dodge Magnum... • Answered on Jan 01, 2022 • 66 views
0helpful
1answer

2005 Dodge Magnum set 3.5L V6 used to be a police car. P0700 and p1775?

https://www.yourmechanic.com/article/p0700-obd-ii-trouble-code-transmission-control-system-malfunction-by-spencer-clayton#:~:text=P0700%20is%20set%20when%20the,or%20normal https://www.engine-codes.com/p1775.html the 700 is the tcm detecting a problem and the problem its detecting is with the tcc the second link has solutions to assist with repair ----also a low battery can cause havoc with trans
9/19/2021 2:50:15 PM • Dodge Magnum... • Answered on Sep 19, 2021 • 133 views
0helpful
1answer

Have you heard or read that 3.5L engines in the Magnums blow up?

Dodge magnum engines are like any other make or model. Engines usually only 'blow up' if they have not been maintained correctly and have been badly treated, (driven hard before the engine has warmed up to working temperature. If you want a Magnum go and look at as many as you can BEFORE you decide to buy one. If the vehicle has no documented history WALK AWAY!! Not sure but it seems the 2006 and 2008 models seemed to be the problem years. There were more than one engine size fitted so the issue could have been with the larger V8 engine.
8/11/2021 1:57:48 PM • Dodge Magnum... • Answered on Aug 11, 2021 • 39 views
0helpful
1answer

2007 magnum wagon has a loud squeak in the right front end

you need breaks
10/19/2019 8:33:21 PM • Dodge Magnum... • Answered on Oct 19, 2019 • 74 views
0helpful
1answer

2007 magnum wagon loud right front end squeak

Check any rubber on your struts or any other rubber that's used for softening/dampering on the steering. I once had a piece of rubber on the front of a car that would squeak when my wife hit bumps going down our driveway, drive my wife crazy and since it was under warranty we made the stealership find and repair it. Only took about 5 trips to stealership before the clowns finally found it.
6/29/2019 10:47:18 AM • Dodge Magnum... • Answered on Jun 29, 2019 • 49 views
0helpful
3answers

I have a 95 dodge 360 magnum i found 4 pushrods bent what could cause this to happen

Over revving the engine.
4/9/2019 5:03:40 AM • Dodge Magnum... • Answered on Apr 09, 2019 • 84 views
0helpful
1answer

Fuel pump ground location on 2007 magnum

Frame close to the pump as posible.
11/18/2018 2:43:37 AM • Dodge Magnum... • Answered on Nov 18, 2018 • 321 views
0helpful
1answer

1978 magnum shut off while driving also while running in park can restart after putting in park and turn key on and off

Look at the ignition switch itself or the wire harness that connects to it.
4/30/2018 2:57:57 AM • Dodge Magnum... • Answered on Apr 30, 2018 • 53 views
0helpful
1answer

I have a 2007 dodge magnum and i hazard lights

I suggest you get one of those manuals people get nowadays to do it yourself.. My brother use it to repair my car and it's totally repaired now. he got it from. www.reliable-store.com
3/7/2018 6:12:14 PM • Dodge Magnum... • Answered on Mar 07, 2018 • 82 views
0helpful
1answer

I have a 2005 Dodge

If it was the key or the theft deterrent system it would have a light on dash with a key symbol I would check the relays in the power dist box for crank and ign make sure there good and if you have another key try it also and it's possible the receiver for tds is bad is is in the column and is around the ign switch
7/14/2017 11:08:51 PM • Dodge Magnum... • Answered on Jul 14, 2017 • 240 views
0helpful
1answer

I have a 2006 dodge

I really question what kind of mechanic "fixes" 17 codes without getting the car running. You need to find a more competent mechanic. You have not provided nearly enough detail for anyone to advise replacing a crank sensor and/or cam sensor as a possible fix.
3/18/2017 8:07:32 PM • Dodge Magnum... • Answered on Mar 18, 2017 • 146 views
0helpful
1answer

Have a 2006 Dodge Magnum 2.7L the car is pulsating at when you accelerate won't go past 15 MPH. Whats wrong?

Engine control module. Run a diagnostic test to see if the cam and crank sensors are working.
2/9/2017 4:43:38 AM • Dodge Magnum... • Answered on Feb 09, 2017 • 65 views
0helpful
1answer

On a 2006 Dodge magnum if the heater quits blowing hot air what's wrong with it

More then likely the air temperature control blend door is not moving.
12/30/2016 10:31:37 PM • Dodge Magnum... • Answered on Dec 30, 2016 • 336 views
0helpful
1answer

06 magnum starter relay fuse

Ignition fuse, make sure wires to starter are tight, make sure the ignition wire (skinny), is getting 12v+, when you click the key, it should only be energize when you do it with the key
12/22/2016 8:38:16 PM • Dodge Magnum... • Answered on Dec 22, 2016 • 501 views
0helpful
1answer
0helpful
1answer

Were is my starter relay on my Dodge magnum 2007

http://elsalvadorla.org/dodge/dodge-magnum-starter-relay-location ,try looking at this site its the only one I can find for at mo.
11/1/2016 11:54:52 PM • Dodge Magnum... • Answered on Nov 01, 2016 • 377 views
0helpful
1answer

2007 dodge magnum cluster led lights dont work. how to fix the problem?

The bad thing is the cluster lights are part of the cluster ya have to change the whole cluster. Or it could be you have to turn the brightness up
11/1/2016 12:28:56 AM • Dodge Magnum... • Answered on Nov 01, 2016 • 137 views
0helpful
1answer

What clips does the dodge magnum door panel carry

there plastic
6/17/2015 8:16:27 PM • Dodge Magnum... • Answered on Jun 17, 2015 • 49 views
Not finding what you are looking for?
2007 Dodge Magnum RT Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...