take it to an accredited brake specialist shop
I suspect that the brake booster is becoming defective and the small application to the pedal causes excessive booster reaction
the abs section only maintains applied brake fluid pressure as set by the position of the pedal
that is to maintain the pressure as the stopping and start movement of a skidding wheel opens and closes a valve to that wheel /s
if you are on ice that sudden hard braking will cause the wheels to lock and immediately the abs cuts in to allow the wheels to turn and then to allow brake action to be reapplied
if the abs is working under brakes you will get a pulsating feeling under your foot as the fluid pressure is alternation between full on and released by the abs valves
No it isn'tGo to any online parts site or Google the questionYou will see all sorts of ball joints for your car & no need to buy the entire control arm
You would need to have someone scan the body computer to check for codes. Most code readers will not access body computers.The cruise would stop working if the ABS light came on for safety reasons.
Question re-written for clarity.
Question moved to model category.
There aren't any. The headlights are a function of the IPM (integrated power module). Fuse 36 is the control according to this.
Headlamp / Washer Control / Smart Glass
Vehicle Historyhttps://www.vehiclehistory.com > questions > whats-th...
Jul 16, 2020 - The head lamps are controlled by a fuse in the engine bay. To locate the integrated power module, open the hood and look on the driver's side of ...
2 answers ยท Top answer: The 2007 Dodge Caliber is noted for driver's side low beam headlights that f
The torque specification for the manifold to catalytic converter bolts on a 2007 Dodge Caliber RT with a 2.4L engine is 26 Nm (19 lb-ft). It's important to use a torque wrench to ensure the proper torque is applied to the bolts to avoid over-tightening or under-tightening, which could lead to problems with the exhaust system.
