20 Most Recent 2007 Citroen Xsara Kombi Questions & Answers

on google

5w30 or 5w40 fully synthatics.

change the fuse from 15 amp to 20 amp will cure your problem

external temperature display is this the external, ambient air temperature, option? sure , bad sensor, bad wires or connection to it. the FSM book covers these test. (buy one?) Factory service manual. sold at all Citroen dealers.

passenger side dash.

I would check for an air leak in the fuel pipe.

Hook up a battery charger, or jumpers to a good battery then secure the vehicle.

I have been looking for that fuse as well. Hence i end up most f time playing fortnite free v bucks codes

Usually something in the rails blocking it. using compressed air try blowing down the rails to clear them. also try using a thin metal rod, i find if you dismantle a long wiper blade you will find 2 flat metal rods which are perfect for dislodging any foreign objects in the rails. Hope this helps.

You can get guide from many sites.. i know few error codes/ fault codes, wiring diagrams, schematic diagrams, torque specs, engine info, switches functioning, assemble, disassembly, complete refurbish, repair, installation every single thi ng is covered within seconds u can get the access and it's totally illustrative complete

Are the drain holes in the bottom of the sills still open after the new sills were installed?

My personal suggestion would be to go for these repair catalogs from www.reliable-store.com instead. much better info on all vehicles, complete details, and they also have live assistance feature

If you're finding it difficult to service/repair your car, get one of those online manuals. You'll not have to wait for others to answer, or rely on mechanics and all. Plus I know a website that has very good manuals online, without expiry i.e. for lifetime. www.reliable-store.com

Check your temperature sensor

Your seat is usually bolted to the floor of the vehicle. If you remove the bolts and unplug any electrical connectors you should be able to remove the seat. You will need to fabricate brackets that attach to the vehicle as the original seats did and then the brackets will need to attach to your new seat.