20 Most Recent
2010 Citroen Berlingo 1.6 Questions & Answers
I have a citroen berlingo
YES HAVE THE BALL JOINTS CHEKED AND THE IDLER ARM I ASUME YOU MEAN THE TIE RODS HAVE BEEN REPLACE IF SO,,, AND IF THE BALL JOINTS ARE OK AND IDLER ARM IS GOOD THEN YOU NEED A FRONT END ALINEMENT, CHANGING THE TIE RODS CHANGES THE WHOLE ALINEMENT
Hello I have a 2001 citroen berlingo multispacer forte 1.9 diesel I cannot find where the cabin filter is if you can help thankyou
The pollen filter in mounted inside the car in the passenger side footwell. Remove the lower kick panel. It is held in with push clips that can be gently hooked out with a screwdriver. Once the panel is out there is a black plastic casing up under the dashboard. There should be a long rectangular cover that will slide sideways and come free. This should reveal the filter. Slide the old filter out noting which way around it is and slide in the new clean filter. Replace the slide panel, refit the kick panel and push the retaining clips firmly until they click into place.
Losing power on LPG. Seems to run fine for a
Wiring, schematic, electrical diagrams, fuse diag, error codes, torque settings etc are basic contents of these online books they have here on this website www.reliable-store.com I have attached. Must check it out
Citroen dispatch
Contact the manufacturer directly and get loud until they respond if they have worked on this issue before keep all of your paperwork showing what they have done as well as when they did it a paper trail is important
Not finding what you are looking for?