20 Most Recent
1978 Chevrolet Corvette - Page 6 Questions & Answers
Dash lights don`t work on
Your dash light...(instrument panel fuse is blown) or the headlight switch is bad...If you need any parts...the internet for corvettes is awesome. Hope this helps...(Just over 100,000 ) corvettes were made in 1975...
1/2/2015 4:45:27 PM •
Chevrolet...
•
Answered
on Jan 02, 2015
Piston bore clearance 30
Find a place that clean remove as much as part in order as you can. oil pan drop it transmission pan drop it battery remove and keep thing clean as possible. starter intake everything fan power pump and radiator than you can remove hood and get a lift for engines and unbolt the trans than the motor mounts
8/12/2014 4:40:46 AM •
Chevrolet...
•
Answered
on Aug 12, 2014
I have stored in a garage and not started a 1996 Chevy Corvette
Hopefully you used a good fuel stabilizer before storage. Check your oil and coolant levels. If the car didn't smoke before storage, then you should be ok with starting it. If it did, you may want to spray a little dab of wd-40 or some other type of lubricant into each plug, or just remove airfilter and spray just a tad while starting, not really necessary, but can give you a little piece of mind. You should change your oil and filter at your first convenience, and when you do start it, run it for a good 20 minutes to burn off any impurities in the engine. Before driving, check your tires and air pressure. I would recommend changing tires if you see any signs of dryrot or cracking in the sidewalls before driving very fast(above 70). The rubber in tires will degrade over time, it is harder on them in storage than driving them.
8/5/2014 11:22:42 PM •
Chevrolet...
•
Answered
on Aug 05, 2014
Not finding what you are looking for?