2006 BMW M6 Coupe - Answered Questions & Fixed issues

Have you checked your fuses ? Might also want to begin checking for power from the fuse panel to the light assembly.

BMW M6 Cars &... | Answered on Nov 30, 2016 | 28 views

Hi, you need to explain the problem your having a bit in order for us to help you. Please describe your problem in detail so we will be able to assist.

BMW M6 Cars &... | Answered on Apr 01, 2011 | 168 views

On the newer model cars they have started putting the battery under a myriad of plastic covers to make the engine compartment look cleaner. The "+" post that you have found is directly connect to the positive terminal on the battery. Put the positive cable on that post and then the negative on a bare bolt that is connected to the frame of the car, I would use the one on the sway bar if possible.

BMW M6 Cars &... | Answered on Mar 14, 2011 | 150 views

It's easy to replace push start module

BMW Cars &... | Answered Yesterday | 16 views

You can try out some guide from here reliable-store. com

they also provide live cha t feature for instant help and it's very useful

BMW Cars &... | Answered on Oct 03, 2019 | 14 views

Try, jumping the car with cables, make sure you didn't accidentally pull the solenoid wire from the starter, , if it turns over still nothing check your injectors plugs,

BMW Cars &... | Answered on Oct 02, 2019 | 24 views

I don't think that's possible. You need to remove the subwoofer to get to some of the screws. Space where is the metal plate? In the front? That's normal it Has two it has 2 plastic pins. Pull up the front, keep the lid level than Lift the back straight up.

BMW Cars &... | Answered on Oct 02, 2019 | 18 views

The OBD Code p1774 reads the affected subsystem as Transmission eg. a fault in the Trans. Computer and provides the exact problem as a faulty rear left speed sensor. Check the wire for power reading over 12Volt.

BMW Cars &... | Answered on Oct 01, 2019 | 45 views

check the fuel pressure and then the plugs. There should be a code and a check engine light.

BMW Cars &... | Answered on Sep 26, 2019 | 32 views

spray some penetrating oil on the latches and have someone press down on the hood while you pull the handle. That usually works. If nothing works you might have to sacrifice a grill...

BMW Cars &... | Answered on Sep 26, 2019 | 116 views

You can hook up jumper wires to the jumper connections in the engine compartment.

BMW Cars &... | Answered on Sep 26, 2019 | 41 views

You have to replace the lights. There might be some information out on the web where you can temporarily tape over part of the lens. If not, you will have to re-aim the headlights which might not satisfy the legal requirements. The curb side light has a "kickup" on the curb side

BMW Cars &... | Answered on Sep 26, 2019 | 41 views

Read the OBDII code (or have the codes read). There are multiple possible causes. The code will give a clear indication of the cause.

BMW Cars &... | Answered on Sep 26, 2019 | 23 views

There is a key lock where you can use the ignition key to manually open the boot. with the key fobs, you have to extract the key and use that to open the boot lock. Most cases you can turn is both ways once inserted but you will see when it "pops".

BMW Cars &... | Answered on Sep 26, 2019 | 22 views

Have you checked the connector for corrosion or damage to the cable? The tail light is a bulb and the brake light consists of two TEDs Have a look here for more details https://www.newtis.info/tisv2/a/en/e63-650i-cou/repair-manuals/63-lights/63-99-working-time-without-specification-lights/PIwiZ49

BMW Cars &... | Answered on Sep 26, 2019 | 19 views

You need a key of some type.



How do you change a ignition lock cylinder without a key? How to Remove the Ignition Switch Without a Key
  1. Turn on your power drill and use your drill bit to make a hold in the key slot of the ignition cylinder. ...
  2. Insert a straightened out paperclip into the slot just to the left of the key cylinder. ...
  3. Inserting your screwdriver into the cylinder and turn it as far as you can to the right.

How to Remove the Ignition Switch Without a Key ' It Still Runs
https://itstillruns.com > remove-ignition-switch-key-7805854

BMW Cars &... | Answered on Sep 25, 2019 | 28 views

Not finding what you are looking for?
2006 BMW M6 Coupe Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2009 BMW M6
2009 BMW M6

-2 Questions

2007 BMW M6 Coupe
2007 BMW M6 Coupe

-1 Questions

2006 BMW M6
2006 BMW M6

5 Questions

Top BMW Experts

stephen Kiarie
stephen Kiarie

Level 1 Expert

32 Answers

Roy Cunningham

Level 1 Expert

35 Answers


Level 3 Expert

1234 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides