20 Most Recent 1990 BMW 525i Questions & Answers

probable a pressure switch under car somewhere

in cap of expansion tank

STOP what you are doing before you damage something!! Whatever you are trying to remove is not the water pump. Neither the sparkplugs nor the "timing belt" cover needs to come off. Remove the fan belt. Remove the fan (the nut is LH thread- means it turns left to tighten and right to loosen). You will need a large wrench (32mm) availible at sears.The water pump is directly behind the fan and is held in by 4 10mm bolts.

Check the battery. It may be giving off a low voltage reading.

There's trapped air in the cooling system.

• You need to remove the bleeder screw on top of the radiator when adding water to the expansion tank.
• With the engine running, pour water into the expansion tank till you see air go out through the bleeder screw's hole.
• Just keep adding water until no more air bubbles come out then just put the screw back in place.
• Then fill the expansion tank to it's normal level/line.

Please elaborate for me, the dash display says Check Control?

Check the ground wire first, it's the brown wire and several of them join on a tab that is bolted somewhere in the trunk. Check under the bolt for corrosion. Clean and re-attach.

Hello, The safest way for you to know which gearbox fits your car (second hand) you first have to go to a parts shop with your VIN and get the code and the model for your gearbox. Don't just rely on car year and engine power. Hope this helps

bmwfans.info

You probably blew a fuse of knocked out a wiring harness during the install. Check the fuses first, if you don't see anything blown pull the radio back out and be sure all the wiring harnesses in the area near the radio are secure.

The car was set not to go over 100 mph.

Have you found the fuse box, under the bonnet on LHS of vehicle?In the lid of the fuse box it will outline which fuse controls the function.

Replace the sensor if a oil pressure test shows the engine has enough pressure.

For spark plug problem, click the help links provided below: --- Car has no spark?

http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html

------------ How to Replace Spark Plugs?

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html

------------- Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------ The spark plug firing order for car?

http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html

---------- How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html

----------- Spark plug Replacing for?

http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html

----------- How to identify number one spark plug on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html

--------- How does the spark plug wire go on the distributor cap?

http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html

--------- Spark plug Firing Order Diagram?

http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html

-----------

This will help.

Thanks.