20 Most Recent 1996 BMW 328i - Page 2 Questions & Answers

If you cannot find the code written on something in the glove box, you will have to remove the radio. Once removed, you will need the serial number off of the radio chassis. You can call BMW with this number and they will give you the code. Hope this helps! -Scott europartsplus.com

try downloading from demonoid http://www.demonoid.ph/files/details/2219545/25083580/

If you cannot find the code written on something in the glove box, you will have to remove the radio. Once removed, you will need the serial number off of the radio chassis. You can call BMW with this number and they will give you the code. Hope this helps! -Scott europartsplus.com

disconnect the battery cable then remove the drive shaft from the transmission then remove all wire and cables, then support the engine and take out all the bolts from around the toque converter then from around the transmission,then lower the transmission

here is how to do it...http://forums.evolutionm.net/lancer-tranny-drivetrain-tech/176809-fwd-transmission-removal.html

Need radio make and model as not all BMW's have the same radio fitted .

see other post

slide seat back....two bolts at front of rails, slide forward....two more rear rail bolts. lift out seat. I think your Bowden cable has snapped or become dislodged so you need to remove the rear seat cover to access the workings....easy job

location for a 95 eagle summit crank sensor

Crank and cam signals probably out of sync with each other

I'm sorry our volunteers weren't able to give you an answer. I hope you have more success paying for results.

I would replace the motor and the regulator as a set.