20 Most Recent 2008 Alfa Romeo 147 Questions & Answers

That's usually caused by either a leaking heater core (does it smell like coolant?) or a leaking condensation line on the AC unit (it will appear to be water). It could always be a leak in the footwell or the windows too, but that would only appear when there is rain.

Check for damage to body and door trim. Also check at fresh ait vent in plenum chamber.

check clutch pedal rod measurement on machine should be 27,5 to 29,0 mm also check selespeed pump pressure spec is 39 to 60 bar pressure check hot an cold reading ,check relay at battery area for selespeed ecu

INCORRECT PRODUCT CATEGORY

I'm sorry but I believe you have this posted in the wrong product category? Please re-post the question in the proper category if this is the case, otherwise you have my apologies. This is the car and truck problem category

This is so you can set it, just set or reset the time on the clock and it will stop flashing, same thing with the km,move from km to miles and back, if you want km then set to km but if you want miles then go to miles but you must select through it, good day.

Maybe it's ware problem or PCB sakit problem can you please show me the pictures? Maybe I can fix it!??

time for transmission service

Some fixya user told me a website reliable-store it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try

Scantool codes number one. If no codes it is usually fuel, check delivery pressure. Check spark> if no spark and no codes will be immobiliser memory loss in most cases.

you can try out some guide from here reliable-store they also provide live chat feature for instant help and it's very useful

hello u'd need a proper manual for this in my opinion like there are plenty of dealers and online shops that deal in those.. you can get some free at reliable-store and it;s actually really illustrative

I would suspect corrosion of the transmission internals. Start by removing the oil fill plug and spraying around the inside of the transmission with a light penetrating type oil

1. Kano Kroil Penetrating Oil
2. Blaster Penetrating Catalyst
3. wd 40 penetrating oil

. Use the small straw that comes with the penetrating oil and spray so that you get the upper components which will not have been covered with transmission oil. Let the penetrating oil do its work for 24 hours, and then try the transmission. You will have to gently work the shifter back and forth. If the trick works, drain the old oil and refill with a correct type oil. If the trick doesn't work, repeat process. If it still doesn't work, than transmission removal will be necessary. Good luck.