2010 Mitsubishi Outlander - Answered Questions & Fixed issues

0helpful
1answer

Diagram fuse box diagram 2010 mitsubishi outlander

On this website you find fuse box diagram and description for Mitsubishi Outlander https://www.autogenius.info/mitsubishi-outlander-sport-2010-present-fuse-box-diagram/
6/6/2023 6:25:22 PM • 2010 Mitsubishi... • Answered on Jun 06, 2023 • 877 views
0helpful
1answer
0helpful
1answer

What type of transmission fluid should I use for my 2010 Mitsubishi Outlander as an alternative to CVTF-J1 which I cannot find here in Lilongwe, MALAWI?

AMSOIL SYNTHETIC CVT FLUID SHOULD BE AVAILABLE AT YOUR LOCAL PARTS HOUSE
2/21/2017 5:50:32 PM • 2010 Mitsubishi... • Answered on Feb 21, 2017 • 437 views
0helpful
1answer

Mitsubishi Outlander 2010 driver seat stuck, the seat wont recline backward? How do I go about solving this frustrating issue?

May require removal of seat upholstery to gain access to linkage. Might be best to check with an upholstery shop as they probably know all about this.
6/24/2016 10:15:07 PM • 2010 Mitsubishi... • Answered on Jun 24, 2016 • 903 views
0helpful
1answer

2010 mitsubishi outlander no start no crank

check all your fuses as a first step
5/28/2015 5:22:09 PM • 2010 Mitsubishi... • Answered on May 28, 2015 • 720 views
0helpful
1answer

Is there a relay switch for wipers on a outlander 2010

yes a block of them,or a few in one black box
2/13/2015 2:45:49 PM • 2010 Mitsubishi... • Answered on Feb 13, 2015 • 257 views
0helpful
1answer
0helpful
1answer

Outlander/Peugeot 4007 reversed into stump and smashed oil resivour near diff

Sorry you will need a shop to access the damage.
10/30/2012 10:55:42 PM • 2010 Mitsubishi... • Answered on Oct 30, 2012 • 278 views
0helpful
1answer

Good Day, I have change pad and rotor on my Outlander 2010 V6 LS today. There is a shim on the opposite side of galiper cylinder.....do I need to add this shim on the new jobber pad ? (front) There is

martin,I've a lot of work on all kinds of equipment,And I strongly b eleived that if it came with the shim's that you should put them back I'm like this mechanicly they were ment for a reason. be it nose reduction or what, Iwould check with dealer to play it safe.
9/3/2012 2:06:47 AM • 2010 Mitsubishi... • Answered on Sep 03, 2012 • 223 views
0helpful
1answer

After long drive 30,40 km when car stops on traffic lights loose power 2010 outlader

is your check engine light on it could be anything from fuel to emissions
8/5/2012 7:11:59 AM • 2010 Mitsubishi... • Answered on Aug 05, 2012 • 308 views
0helpful
1answer

What type of antifreeze do i use? It looks like it has a blue or green color in it.

Might want to check with the dealer, but I'm pretty sure Prestone or any good brand will work.The only cars that got picky about anti-freeze were GM cars that required orange dexron or whatever they called it.
12/1/2011 12:36:23 AM • 2010 Mitsubishi... • Answered on Dec 01, 2011 • 394 views
0helpful
1answer

I want to disable the speed alarm that goes off at

there'll be a wire on the back of the speedo face, simply disconnect it
6/28/2011 11:11:47 AM • 2010 Mitsubishi... • Answered on Jun 28, 2011 • 1,454 views
0helpful
1answer

Bought the ASX 3 months ago but I still can't

if the rev is high on parking, then you might need to see your auto mechanic to reduce the rev.
this should stop the problem.
1/9/2011 7:21:41 AM • 2010 Mitsubishi... • Answered on Jan 09, 2011 • 604 views
0helpful
1answer

Hi there I have a 2017 Mitsubishi Outlander and my cigarette lighter port and 12v under arm rest both don't work. Also the mirrors only go down and left not up or right help?

Question edited for clarity, MAKER. Question moved to Category. Check Fuse 7.

Fuse Box Diagram Mitsubishi Outlander (2014-2019..)

https://fuse-box.info > mitsubishi > mitsubishi-outlander... 2017, 2018, 2019 - The fuse box is located in the instrument panel (on the driver's side) to the left of the steering wheel, behind the cover. A - Main fuse .. Your mirror isn't quite so easy. It needs the switch tested, and it could also be the servo motors that control movement.
7/13/2022 2:37:10 AM • Mitsubishi... • Answered on Jul 13, 2022 • 151 views
0helpful
1answer

Mitsubishi grandis TCL switches off when

I have a 2007 Mitsubishi Grandis and the TCL light stays on, have had a diagnostic and it comes up with mo fault. any ideas
10/14/2021 11:44:19 AM • Mitsubishi... • Answered on Oct 14, 2021 • 1,499 views
0helpful
1answer

Fold down rear seats in 1995 Pajero 4x4 wagon

Fold down rear seats in 1995 Pajero 4x4 wagon - Fixya

https://www.fixya.com > cars > t15385582-fold_down_...
May 19, 2017 - Open the back trunk, look near the top of the trunk, and pull the two black levers. They have a seat folding down symbol. That will release the ... Videos as well https://www.google.com/search?q=Fold+down+rear+seats+in+1995+Pajero+4x4+wagon ..
6/25/2021 3:38:31 PM • Mitsubishi... • Answered on Jun 25, 2021 • 379 views
0helpful
1answer

Adjust the handbrake cable on a outlander 2009

where is the adjuster on a 2005 mitsubishi outlander
5/20/2020 1:18:49 AM • Mitsubishi... • Answered on May 20, 2020 • 371 views
0helpful
1answer

Need to find wiring to and from fuel sending unit in2008 outlander

Hope this helps, the color code is at the bottom. I looked up your year--make--model in my database, 2.4L engine. At the main fuel level sensor at the bottom, the top wire should be voltage, the bottom black wire is ground. I did see a couple trouble codes for fuel level sensor, one was a po code, the other was manufacturer specific code. I know nothing about this vehicle other than what my database shows. good luck fuel level sensor-nqvljendps1z53rxwtetir1p-3-0.jpg
7/14/2019 2:52:56 PM • Mitsubishi... • Answered on Jul 14, 2019 • 350 views
0helpful
1answer

Where is the Crankshaft sensor on a Mitsubishi outlander 07 es 3.0l v6 and how do I get to it

If you know anything about gasoline engines at all, I can tell you that the Crankshaft sensor is what replaced the distributor and cap on the engine. You find where the distributor would have been ad that's where the sensor now is. On the top of the distributor shaft. It's easy to get to and no problem to change, it's just a LOT more expensive than the old stuff. Typically only a couple of screws hold it down and you can't screw it up when you use the stuff that comes with the new sensor. Instructions come with it in a kit.
4/7/2019 8:38:07 PM • Mitsubishi... • Answered on Apr 07, 2019 • 1,349 views
Not finding what you are looking for?
2010 Mitsubishi Outlander Logo

56 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...