20 Most Recent
2010 Mitsubishi Outlander - Page 6 Questions & Answers
Indicators & hazard lights
it is worht checking the fuses and also keep working the hazard light switch as they are not used that often they tend to get sticky on the con tacts and that will knock out your indicators as well if they start to work after working afer working the haz switck then change the switch
Loud humming noise front end moving
While driving, slightly turn the wheel left and right, to see if the noise gets louder and quieter. If it does, you have a wheel bearing that is failing. Then you need to isolate which side is making noise and have it replaced. SOON
Reset radio
You have to let it set for around an hour with engine off and key in the on position to get it back to code then you will need the serial number off the top of the radio and call a mitsu dealer n they will give you your correct code
Motor gets hot
check coolant level, and for leaks, check for cooling fan operation, if those are good and working, possibly blockage in radiator or thermostat problem
Not finding what you are looking for?