2010 Lexus GS 450h - Answered Questions & Fixed issues
Hi,
I own 2010 Lexus gs450h.
My
this was a tuff one to track down, but the skinny of it is you can not do what you want to there is no way to override the radio output with your aftermarket nav. system you can plug it into the AUX port in the console but then you will have to push the aux tab on the screen, if you cut the wires to the radio and install a jack to plug in the nav. system that might work but it would not over ride the radio it would just blend with the output it will also void your warranty, and might cause some kind of feedback into thye cars system that might not be good, if your sat nav system has blue tooth you can set it up to work with that and that would override the system.....any way i will post a link here to help you with the opperating of your system....buy the way nice car.
http://drivers.lexus.com/lexusdrivers/info/my-lexus/resources/submit-owners-manual-search#
2006 Lexus IS250 code P0348 help
It is definitely a cam problem. Was your replacement cam sensor OEM Japanese Denso, Made in China or Made in Mexico? Never go cheap on sensors.
DTC P0348 stands for Camshaft Position Sensor "A" Circuit High Bank 2. This code triggers when the signal coming from the CMP sensor located in bank #1 is either missing or inconsistent. The CMP sensor measures the speed and position of the engine's camshaft.
Sep 29, 2023
..
2/28/2024 5:07:03 AM •
Lexus Cars &...
•
Answered
on Feb 28, 2024
•
23 views
Looking for the audio amplifier in a Lexus LX470 1998. It is not under the seat as mentioned in the manual
If you can't find the audio amplifier under the seat as mentioned in the manual, there are a few other places you might want to check:
- Trunk area: Some Lexus LX470 models have the audio amplifier located in the trunk area, often mounted on the side panels or near the rear speakers.
- Behind the dashboard: In some vehicles, especially those with more complex audio systems, the amplifier may be located behind the dashboard or near the head unit. You may need to remove some panels to access it.
- Under the center console: Occasionally, car manufacturers install amplifiers under the center console or beneath other interior panels. This location keeps the amplifier hidden and can save space in the trunk or under the seats.
- Behind the glove compartment: Sometimes, especially in luxury vehicles like Lexus, the amplifier may be tucked away behind the glove compartment. Removing the glove compartment may give you access to the amplifier.
If you still can't locate the amplifier after checking these areas, you may need to consult with a professional car audio technician or refer to specific technical documentation for your vehicle model. They may have insights or access to resources that can help you pinpoint the exact location of the amplifier.
2/14/2024 2:33:22 PM •
Lexus Cars &...
•
Answered
on Feb 14, 2024
•
23 views
How to Disable 2008 Lexus RX350 AFS Warning Light ?
afs off light flashing - ClubLexus - Lexus Forum Discussion
ClubLexus
https://www.clublexus.com > forums > 984100-afs-off...
Apr 9, 2022 - Press the AFS OFF switch twice (once ON and once OFF). HINT: The AFS OFF indicator light stays lit for two seconds. When the AFS OFF switch is ...
AFS OFF Light flashing - ClubLexus
Jan 30, 2008
AFS Off Light Blinking 2008 IS 250
Feb 20, 2017
Where is the AFS off switch?
Jan 10, 2008
"AFS off" warning light is on
Feb 25, 2014
More results from www.clublexus.com
how do i shut off the AFS warning light and what its ...
RepairPal.com
https://repairpal.com > ... > Lexus > RX350 > 2009
May 30, 2022 - The automatic front lighting system (AFS) is malfunctioning. You may be able to navigate to a setting to turn the system "off", ...
Blinking Afs Light On Dashboard
Lexus Owners Club
https://www.lexusownersclub.co.uk > forum > topic
Nov 27, 2010 - 99% of the time when people get the AFS off flashing light it is the mechanical bit of the rear suspension level sensor that has snapped so I ...
Flashing AFS light - Lexus Owners Club
Jul 7, 2017
Warning Lights - Lexus Owners Club
Nov 5, 2018
Afs off light is on permanently - Lexus Owners Club
Dec 10, 2020
Afs Sensor Replacement/repair - Lexus Owners Club
Jan 5, 2014
More results from www.lexusownersclub.co.uk
12/10/2023 2:23:21 AM •
Lexus Cars &...
•
Answered
on Dec 10, 2023
•
45 views
2001 Lexus IS300. If my ECU actually provided codes to obd2 scanner, can the ECU still be bad?
Yes, it is possible for the ECU to be bad even if it is still providing codes to the OBD2 scanner. The ECU is a complex electronic device and it is possible for one or more of its internal components to fail without affecting its ability to communicate with the OBD2 scanner.
In your case, the fact that the codes went away after replacing the #35 fuse and the IAC motor suggests that those were the underlying problems causing the "crank but no start" condition. However, the fact that the car still won't start after those repairs indicates that there is another problem, and it is possible that the ECU is at fault.
To be sure, you would need to take the car to a qualified mechanic and have them perform a more thorough diagnosis. The mechanic may be able to test the ECU to see if it is functioning properly. If the ECU is found to be bad, it will need to be replaced.
Here are some other possible causes of the "crank but no start" condition in your Lexus IS300:
Faulty fuel pump
Faulty spark plugs
Faulty ignition coil
Faulty camshaft or crankshaft sensor
Low compression in one or more cylinders
Clogged fuel filter
Restriction in the air intake system
If the mechanic is unable to find any other problems, then the ECU may indeed be the culprit. However, it is important to rule out all other possibilities before replacing the ECU, as it can be a costly repair.
8/26/2023 6:41:45 AM •
Lexus Cars &...
•
Answered
on Aug 26, 2023
•
34 views
Where is the location of the fuel pump relay for 2004 Lexus RX330?
does it start with 5%(a tad) right foot throttle pressed?
is the IP cluster, IMMO lamp happy? (immobilizer)?????
check all fused first? NOT RELAYS.
check spark first if engine itself tests good.
the classic way for 100 years a test spark plug used.
if spark is good then spray test fuel works.? FOR 3seconds
if that works, then fueling is bad. (no start)
the knock sensor does not kill spark. (it fine tunes spark timing only and only if the engine pings going fast.
then scan the pCM OBD2 port for DTC errors.
check fuel pressure, at the rail.
ok dead fuel pressure.
fuel pump relay is called on this car
AS
EFI MAIN relay
HORN RELAY SAME (SWAPS)
if the PCM detects spark bad it cuts fuel dead.
to prevent crash and burn as see on TV..
the crash sensor also trips the pump off line.
page 553 users man
FUEL PUMP SHUT OFF SYSTEM
The fuel pump shut off system stops supplying fuel to the
engine to minimize the risk of fuel leakage when the engine
stalls or an airbag inflates upon collision. To restart the engine
after the fuel pump shut off system activates, turn the ignition
switch to "
ACC" or "LOCK" once and start it.
https://au.lexusownersclub.com/forums/topic/8368-how-do-i-access-the-rx330-fuel-pump/
6/25/2023 1:29:03 PM •
Lexus Cars &...
•
Answered
on Jun 25, 2023
•
43 views
Hi, I need help with Error code P2121 On a 2006 Lexus IS250.
Some throttle pedals when they are replaced need to be calibrated to the vehicle so the electronics understands were the new pedal is for each position as you use the pedal. This is often done using an OBD2 diagnostic system.
If you have to pay for this service ask at 4 or 5 different places as prices can be VERY different.
6/8/2023 6:19:32 PM •
Lexus Cars &...
•
Answered
on Jun 08, 2023
•
66 views
Steering wheel is locked Lexus is250 2011 but the car will start just can't turn turn steering wheel
using only electronic key or the metal key.(feature)
got park assist option?
a no key slot ignition, fails we scant the PCM for cause.
the steering is first. so wheels against curb or hard rock>?
front tires are free of objects?
to unluck it , try both key car came with new
and grab the wheel and move it CCW/CW roughly to free the key.
shifter is in park I guess. try Neutral? step brake
release hand brake, and shift to N
then unlock wheel. this answer is flat ground answer only
the steps are here
Check that the parking brake is set.
Check that the shift lever is set in P.
Sit in the driver's seat and firmly depress the brake pedal.
The "ENGINE START STOP" switch indicator turns green.
Pressthe"ENGINESTART
STOP" switch
if steering lock fails the books states
The "ENGINE START STOP" switch indica-
tor will flash in green and a message will be
shown on the multi-information display. Press
the "ENGINE START STOP" switch again
while turning the steering wheel left and right!!
read page 137
https://assets.sia.toyota.com/publications/en/om-s/OM53839U/pdf/OM53839U.pdf
5/22/2023 5:52:46 PM •
Lexus Cars &...
•
Answered
on May 22, 2023
•
61 views
2013 Lexus RX 350 crankshaft position sensors is located where
NO COUNTRY TOLD at all. (sold to day1 new) no VIN told no VIN #8 digit told so we can see what engine is there. and what country, some have 8 engines choices not one I can guess and is a pure engine question the endless hunt here. 2 gas engines here and 1 hybrid , engine is TOYOTA's USA got the 3.5L V6, are you here? USA??? the USA engine has 2 pin CKP sensor, 2 pins is huge clue. crank sensors are on the cranks sure but are on front, middle or rear of crank or even under flywheel, 4 places all engines, 1 is true the cranks shaft has the CKP huge tone while dead front of crank. the service manual covers this, only or you can google this. toyota 3.5 L 2GR-FE V6 cranks sensor location bingo.(note using the real name)
5/2/2023 8:45:08 PM •
Lexus Cars &...
•
Answered
on May 02, 2023
•
69 views
Not finding what you are looking for?