20 Most Recent
2012 Jeep Grand Cherokee - Page 7 Questions & Answers
1996 grand cherokee front driver door will not close all the way, the door itself can close if i slam it on the outside but otherwise its very hard.
Your description indicates the door hinges require adjustment.
Usually the striker would be removed and the door hinges adjusted for easy closing and equal gaps. It is likely in your efforts to make the door flush with the front wing, mudguard or fender, the hinges are too far in.
Most likely your replacement door is not identical to the original - not unusual for various reasons...
Once the door hinges have been adjusted to provide a satisfactory position and closing the striker would be refitted and adjusted so it goes into the catch or latch dead centre - neither lifts nor pulls down the door as it closes.
That is where the door needs to be and if it stands proud a little it is just bad luck - often the front fender can be repositioned and then the bonnet or hood readjusted.
A competent panel beater would be able to tweak things for you to make them acceptable.
It might have been better to fit a new latch to the original door.
Code error number p0135
P0134....O2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1)
P0135....O2 Sensor Heater Circuit (Bank 1 Sensor 1) heater in the O2 sensor has packed up first sensor before the cat
Not finding what you are looking for?