20 Most Recent
2011 Hyundai Tucson - Page 4 Questions & Answers
Good day
I have tucson 2011
I would start by making sure the battery is good and nithing was left on and drained the battery,check and see if the headlight come on and are bright, if the lights are dim or dont turn on then the battery is low, also check the connections at the battery, make sure they are clean and tight. you can try to jump start it if battery is low. if the battery is good then you may have a bad starter or a problem with the antitheft system,again start with the battery, make sure inside ;ight are working and check the headlights. good day.
Low beam lights do not
Remove the headlight and place a multimeter on the leads for ground and low beam, if there is voltage replace the headlight, if there is not voltage check the wiring between the switch and the headlamp.
Code p 2015
Intake Manifold Runner Position Sensor/Switch Circuit Range/Perf. (Bank 1)
2017 Hyundai Tuscon drivers seat mechanism will not work for reclining seat. I need this to help ease getting in and out. Is this something I can fix myself?
The mechanism of a reclining driver's seat in a car can be complex, and it may require specialized tools and knowledge to diagnose and fix the problem. Depending on the cause of the issue, it may be possible for you to fix it yourself if you have the necessary skills and tools, but if you are not experienced with automotive repairs, it may be best to take the vehicle to a professional mechanic.
Before attempting any repairs, you should consult the owner's manual for your vehicle to understand the seat mechanism and any safety precautions you should take. If the problem is related to a broken part or a loose connection, you may be able to fix it by yourself with some basic tools.
However, if the issue is more complex or requires a replacement part, it may be best to take your vehicle to a professional mechanic or an authorized Hyundai dealership for repair. They will have the expertise and experience to diagnose the problem and repair the seat mechanism correctly and safely.
Tucson back door won't open
Tucson has this notorious problem. The door locks operate using a steel cable, just like the clutch cable of most of the motorcycles. This cable stretches out with time and eventually, the throw of the lock (the range of motion) would not be enough to pull the cable sufficiently and unlock the cars. On youtube, you'll find some fixes which basically suggest to cut the stopper in the lock mechanism to increase the throw length of the lock latch.
How to reset the oil change light on a 2011 tucson
If the oil-change light does not go away after service, carry out these steps to reset it:
1. Put the ignition in "ON" position
2. Use the menu on your speedometer
3. Push the button on your steering and get to the 'Service Required' menu
4. Hold the "OK" button to reset. The light should go away now.
Not finding what you are looking for?