20 Most Recent 2010 Honda Odyssey - Page 8 Questions & Answers

Code B12 is your 10,000 miles check up:

B: oil & filter change
1: tire rotation
2: engine air filter, cabin air filter change


Reset Meter:
1: turn car to ON (II)
2: press sel/res button until oil life % is displayed
3: press & hold sel/res button until oil life blinks (10 seconds)
4: release button
5: press & hold sel/res button until oil life shows 100 (5 seconds)


Hope this helps (remember to rate this answer). Good luck.

Have you check the globe or fuse?

Enhanced data rate.

have the OBD codes read as will tell you which sensor/switch is at fault

have the OBD codes read as will pinpoint the sensor/switch as could be a few things , i'd guess at the MAP or CRANK sensor but the OBD code will give definate answer

I had this happen to me on a motor that sat before installing. The chipmunks ate thru the harness on top of the engine.Check the harness,Good luck!

Traction control system is kicking in. You need to have it diagnosed. As it could be caused by a multitude of things include computer module, sensors,

The built in security will prevent you from bypassing the ignition. It's part of the anti-theft built in the ICU.

they have an electric actuator under the steering column in the switch assembly if the locksmith took the assembly off he forgot to put it all together look for a cable lose under there is a steel cable that pulls not an electric one or most hondas have a key hole next to the shifter just push the key on and it should release thank you let me know if this help or need further assistance