20 Most Recent 2011 Dodge Nitro Questions & Answers

transmission shouldn't have a dip stick. its a dealer only component and voids any warranty if you add any fluid to it yourself.

Google it

You first make sure that the cooling system is completely bled/purged of any trapped air, that can cause both symptoms, it that is done and you are sure you have purged all the air out then the head gasket would be most likely leaking.

Where the key goes in. If dash mounted you will have to pull the dash cover to access it. If it needs replaced it needs to go to a dealer for programming.

Hey guys I have a 2011 Dodge Nitro 3.7 and today my engine light came on and it was running like I was on rumble strips. I floored it and it sputtered and ran terrible then the light started flashing then I cut it off tried to reset still the light came on. I put the scanner on it and it turned out to be the coil plug on the #3 cylinder. COIL PLUG. Hope this helps out GOD BLESS!

Giant pain in the but, I'm a chrysler tech and they are not fun, if you take the air filter box out it's doable but not easy, best bet is to remove the coolant and washer bottles and th fan shroud....also not easy to do

Pull Back The Little pulley And Take It Off

Your check engine light flashing means that the on-board computer has detected a problem, as a result there is now a Check Engine Light (CEL) code which you can have retrieved using a code scanner. Many auto parts stores will come out to your car and retrieve the code for you for free. Call around and find a parts store to do this, or obviously any mechanic with an OBD-II scanner can do the same thing. Once you have the exact code we can help more.

The steering wheel connection is adrift? What made the circuit when you stripped it?

ok code po455 is a code for the evaporative control monitor,for this i would suggest you check the dealer because its a very large leak in the evap system,and for the po456 which is a very small leak in the evap system

The next step is to get a smoke check which usually tells you where the leak is. Good luck!

Some car parts places like AutoZone will plug in a diagnostic tool called an ODB2 and can tell you the error code.then 'maybe' they will tell you what that means. and if you get a nice person they will reset it although they are not supposed to.Any rate then google the diagnostic code for solutions.