20 Most Recent 2010 Dodge Grand Caravan - Page 8 Questions & Answers

check for faulty switch in frame of gate may have pushed in and wont recognize it being shut

Take both + and- battery cables off battery for couple of minutes that usually will reset the computer

If you refering to the clip that holds the flexible line at a metal mount point where it is screwed in to the steel line. Then you undo the fitting first from the steel line as the rubber hose has flats that prevent it from turning while doing this. Once youhave seperated the lines the clip should have a flat section bent at right angles Grip this with a good pair of multigrips and pull sideways. The clip will come free and the rubber hose will be able to be pulled out of the mount.. Then you unscrew the hose from the calper unit. Best use a new copper washer here to avoid leaks in the future,

It is to the right front corner. You need to get down low to look thru a scoop like opening of the bumper. It's simple to replace, at least it is on my 2005. Buy it first so as to know what you are looking for.

could take 2 to 3 days

The switch in on the latch itself. When the striker goes into the latch it also trigger the small micro switch.You can try something like WD40 and spray liberally into the latch and open close it 10 times or so to see if it frees it up.