20 Most Recent 2012 Chevrolet Spark Questions & Answers

Question edited for clarity. Question moved to model category. They are all here for B12D, and more in the main link below. images of sequence too.

Engine Aveo 1.2 B12D Specifications PDF

Scribd https://www.scribd.com > document Fastener Tightening Specifications · Timing Chain Lever Retaining Bolts 10 Nm 7.4 lb ft · Engine Mechanical Specifications · l No. 4 23-23.021 mm 0.9055-0.9063 in. Rating: 5 · ‎1 vote https://www.google.com/search?q=B12D1+Torque+settings

Question edited for clarity. Question moved from Computers to Model category. Lot of help here https://www.google.com/search?q=2012+Chevy+Spark.+what+are+the+tappet+settings

The anti security light just stays on no matter what I do. And it want let the car do anything

Chevvyspark 2010- radio working but not the display. Does anyone know what this could be please? TIA

chev spark 2007 fuel guage,wipers,speedo meter just colups

The most likely reason will be the wiring for the reverse light. A possible reason for this could be moisture or an electrical short. If the light is constantly On the switch is being bypassed somehow. You'll need to check the wiring all the way through from the battery to the light lense. Occasionally the wiring to the back of the light lense can cause problems if dirt or moisture gets in.

check location on knock sensor, remove first and clean first its full of dirt.

Here is a link to the owner's manual, so you can look up the locations of the fuse boxes. https://my.gm.com/home

According to this forum, you won't need the code for the radio in a Chevrolet. The GM radios don't lose their code when the battery is replaced. Thread Radio Code after Battery Disconnect

Try this link: here

What is the reset code for the radio in a Chevy spark 2997 after a battery replacement?
Can u sand me Emil
[email protected]

P2122 - Throttle/Pedal Position Sensor/Switch 'D' Circuit Low

It is easy to find. Find your top radiator hose .follow it to the engine , where you see it clamped on is where the thermostat is. you'll need to remove hose then there will be 2 bolts holding the cap down remove said bolts and your thermostat is underneath that.hope i helped.

call dealer

still under warranty then take it back asap and have it fixed. Check the recall on the ignition switch while you are there.

Try check ECU (Engine Control Unit)