20 Most Recent 2012 Chevrolet Sonic Questions & Answers

Question edited for clarity, full maker name and model. Question moved to category. You MUST use new bolts as they stretch on the last tightening pass. https://www.csmans.com/cylinder_head_installation-2165.html https://www.google.com/search?q=chevrolet+sonic+F16D4+cylinder+head+torque+settings ..

Code 82 is change oil soon. If you have just changed the oil or go have it changed somewhere then you can clear it, but DO NOT simply clear it

Take to dealer for dignosis, this might be a safety issue.

If you do not have a copy of the manual, go here: http://www.chevrolet.com/content/dam/Chevrolet/northamerica/usa/nscwebsite/en/Home/Ownership/Manuals_and_Videos/02_pdf/GTK_2012_Sonic_22816420_A.pdf Page 13: • To turn off traction control, press the Traction Control/StabiliTrak Off button. The Traction Control Off light will illuminate on the instrument cluster. Turn off traction control if the vehicle is stuck and rocking the vehicle is required. • To turn off both traction control and StabiliTrak, press and hold the button. The Traction Control Off light and StabiliTrak Off light will illuminate on the instrument cluster. • Press the b

Tensioner pulleys are designed to be 'Self Adjusting'. These pulleys are on spring loaded arms so they automatically push against the belt keeping it tight. You use a socket or a spanner to swing the pulley arm back against this spring. *Note* This is a powerful spring so BE CAREFUL when your working on it! A lot of these tensioners have two small holes to help with installing a belt. When you swing the tensioner arm back these two holes line up with each other. You can then slide a hex key, or something similar, through both holes and it holds the arm back giving you space to get the belt on. *Caution* When your ready to release the tensioner DO NOT just pull the hex key out!! With the socket or spanner you used to swing the tensioner arm back push the arm against the spring again, carefully pull the allen key out then Carefully release the pressure on the spring so the pulley sits correctly and tensions the belt.

Help in the link. It may be a faulty switch, but you can test it. https://www.google.com/search?q=2012+Chevrolet+Orlando+open+jammed+hatch ..

check the abs system for relay and electrical problems the clicking can be from a cycling relay and the head lights flickering from the power draw for the abs away from the head lights.

You either replace the whole board as a module, or a company like RS Components, or even Amazon can sell you just the solder-on USB socket. https://www.google.com/search?q=usb+port+replacement ..

The oil cooler runs through the radiator and when damaged can exchange fluids.

google 1994 Chevrolet C1500 5.7 l ransmission control module select images and you will see module.

Unfortunately this question is part English and part Spanish aclienders? auto magic transformation? ..

The reverse wire on the car audio harness for a 2006 Chevrolet Silverado is yellow. If you're connecting an aftermarket stereo, this wire is used to trigger the reverse camera display when you shift into reverse. Make sure to connect it appropriately for your specific installation needs.

I would go to an AutoZone, or similar parts store, that does free code scans, they can explain what's going on.

https://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/torque3.pdf Check this manual