P060A internal control module monitoring processor
This post may be an old post, but I figured I'd post my findings in case anyone is still fighting the good fight.
My vehicle:
2008 Honda Accord 2.4L EX-L
Codes: P062f p060a p2610 p2118
Hard starting when cold or sitting for over 25 min. Otherwise would start fine and drive fine with no issues until next start.
Process:
Replaced battery, no change
Sent Pcm (ecu) for repair/service. ECU came back with no errors or damage found. No change.
Replaced throttle body, no change.
Cleaned map and maf sensors, no change. (This fixed issue for someone so figured I would inspect.)
Replaced FTP, code went away, but no change.
*Note: During idle, I noticed a minimal sputter. Almost not audible.
Researched more, and one person mentioned they changed the spark plugs and that fixed their car.
So, I produce a list of all possible fuel/Ignition related possibilities for hard start/idle sputter.
Spark plugs
Ignition coils
Injectors
Fuel pump
As for me, I replaced the fuel injectors, ignition coils, and fuel pump about 2 years ago. And due to covid my car was almost not driven for the last 2 years. So, I removed them as possibilities for me. That left spark plugs.
I bought some NGK iridium plugs and replaced them. Old plugs were worn. (See pictures). This resolved my issues. No more cell lights, hard start, or idle sputter.
Definitely do your due diligence, but I'd say definitely go in this direction if your symptoms sound like mine did.
Good luck, everyone.
3/3/2022 2:56:03 AM •
2008 Honda...
•
Answered
on Mar 03, 2022
•
2,794 views