the tcs can mean 2 things, 1 is the temperature colant switch, which is mostly located on top of the intake manifold, and sometimes close to the thermostat housing, this is based upon what type of vehicle it is, and the engine size. also unless your computer might be saying throttle control sensor, or switch. this switch should be located close to the throttle body area, after replacing or checking out the part, you can remove the light , either with a ob 2 scan tool, or disconnect the positive battery cable for about 1 minute, then reconnect it back up, light should now be out.
Bulbs are usually not interchangeable as the wrong type won't fit. Find the bulb type by removing one of the old ones. replace both of the low beams at the same time. If you buy two of the same variety and they are the right bulb number (H7 is a style of low beam) they are okay to use, Change in pairs so beam color and bulb life are the same.
Thanks for using FixYa. Hook up a meter and check the voltage.
If it drops below 8 volts then it means that there is certain a problem. Please
also check the fuses under the hood. One of them might have blown. The other
thing is that you should get it reprogrammed. If the door button on the door
didn't cause the doors then it means that the problem is not with your keys. Also
try locking the doors with the switch on the passenger side. If still the issue
persists, then there is a problem with the battery. Please remove the battery
from the vehicle and have it tested at an auto parts store if the vehicle is
not under warranty otherwise take it to the dealer to avoid voiding your
warranty.
Please do accept the solution if the issue is resolved or else revert for
further assistance.
Looking for a roof repair sterling va? They fix roofs and make sure your home stays safe from rain and storms. They're the experts you need for a sturdy roof over your head.
It is definitely a cam problem. Was your replacement cam sensor OEM Japanese Denso, Made in China or Made in Mexico? Never go cheap on sensors.
DTC P0348 stands for Camshaft Position Sensor "A" Circuit High Bank 2. This code triggers when the signal coming from the CMP sensor located in bank #1 is either missing or inconsistent. The CMP sensor measures the speed and position of the engine's camshaft.
Sep 29, 2023
If you can't find the audio amplifier under the seat as mentioned in the manual, there are a few other places you might want to check:
Trunk area: Some Lexus LX470 models have the audio amplifier located in the trunk area, often mounted on the side panels or near the rear speakers.
Behind the dashboard: In some vehicles, especially those with more complex audio systems, the amplifier may be located behind the dashboard or near the head unit. You may need to remove some panels to access it.
Under the center console: Occasionally, car manufacturers install amplifiers under the center console or beneath other interior panels. This location keeps the amplifier hidden and can save space in the trunk or under the seats.
Behind the glove compartment: Sometimes, especially in luxury vehicles like Lexus, the amplifier may be tucked away behind the glove compartment. Removing the glove compartment may give you access to the amplifier.
If you still can't locate the amplifier after checking these areas, you may need to consult with a professional car audio technician or refer to specific technical documentation for your vehicle model. They may have insights or access to resources that can help you pinpoint the exact location of the amplifier.
Certainly! Here's a question inspired by your inquiry:
"I'm a proud owner of a 1998 Lexus LX470 with the Lexus Premium Sound System, Matsushita Model No 8620-60320, Reference No CQ-LT4730A. Does anyone have information on the pin-out and schematic for this particular sound system? I'm looking to understand the wiring better and would greatly appreciate any insights or resources on this topic. Thank you!"
