20 Most Recent 2009 Hyundai Accent - Page 2 Questions & Answers

do you have the manual for it, that should give you optitons on disarming it.

Don't use that mechanic anymore. What he said is wrong just replace switch. The gear shifter and brake switch separate from each other

If all the brake lights come on ( including high mount ) with the headlights there is most likely a short somewhere. Have any of the park/brake light bulbs been changed recently. If so a bulb may be installed incorrectly or the wrong bulb application used.

Have you check your oil....... go down to the parts house and ask them to scan for codes .....then post codes on here that will help figure out your problem.. there are a lot of thing that can cause your car to act that way If you need further help, reach me via phone at https://www.6ya.com/expert/dennis_f849d3d6a68c6430

Usually a flashing blue light is from an aftermarket installed alarm system or remote starter. You may want to check your owners manual if the light is in the mirror glass.

If you didn't hit anything and the wheels locked up you most likely only flat spotted your tires. I would check the condition of the tires as they need to be balanced or replaced.

The fuse is located in the fuse panel under the hood of the vehicle behind the Battery. It's close to the condenser fan relay.

You have a short going to ground . If it only happens when you use the left or right turn signal , then it is in that circuit. If it happens with both , then that is something different . You are going to need to get a schematic for your car and trace out the circuit or take your car to someone who can read a schematic. But first, if the fuse only blows on one side, then You can unplug the bulbs from the sockets of the side that blows the fuse and check to see if the fuse still blows, then check the sockets for any burn marks, and then check the wiring going to the sockets for any bald spots where it could touch the frame. If everything looks normal, then you are going to need to get the schematic. If you brought your car to me, I could fix it , so don't give up hope .

Possible causes - Intake air leaks - Faulty front heated oxygen sensor - Ignition misfiring - Faulty fuel injectors - Exhaust gas leaks - Incorrect fuel pressure - Lack of fuel - Faulty Mass Air Flow (MAF) sensor - Incorrect Positive Crankcase Ventilation (PCV) hose connection Read more: http://engine-codes.com/p0170_hyundai.html#ixzz3DcpvSLIs

Code 339 means there is a problem with the crank sensor circuit. The sensor would need to be tested.