20 Most Recent 2009 Honda Accord Questions & Answers


I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

2009 Honda... | Answered on Feb 27, 2019


I think you could use this manual method instead.. My nephew use it to repair my car and it's totally repaired now. Here's the website he bought it from . reliable-store

2009 Honda... | Answered on Feb 18, 2019


hello
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

2009 Honda... | Answered on Jan 26, 2019


Want to programs the remote key of your Honda cars, then you must reprogram all of the key-less remotes of your Honda Accord once you are in the programming mode. You must complete each step quickly so to prevent the system from exiting the programming mode.

Note: Maximum Three remote transmitters can be programmed.

Make sure all the doors are UNLOCKED before starting this programming procedure.
1. Turn ignition switch to ON (II)
2. Press the LOCK or UNLOCK button on one of the remotes. (An unprogrammed remote can be used for this step.)
3. Turn ignition switch to ACCESSORY (I) or LOCK (O)
4. Turn ignition switch to ON (II)
5. Press the LOCK or UNLOCK button on one of the remotes.
6. Turn ignition switch to ACCESSORY (I) or LOCK (O)
7. Turn ignition switch to ON (II)
8. Press the LOCK or UNLOCK button on one of the remotes.
9. Turn ignition switch to ACCESSORY (I) or LOCK (O)
10. Turn ignition switch to ON (II)
11. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode.
12.Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle after you push each remote button to confirm system has accepted the remote.
13.Turn the ignition switch to LOCK (O) to exit programming mode.
14. Test remote(s)

For more clarification, i have also shared the video to do this process, Have a look

2009 Honda... | Answered on Nov 27, 2017


Check to determine whether the shop eliminated all probable causes of DTCs P0303 and P0306.

2009 Honda... | Answered on May 24, 2017


First, brake pad life depends on your driving style. Drive hard, brake a lot and the pads won't last a long time. Second, the material of the pads can affect life too.
It wouldn't hurt to ask the dealership about the service bulletin on your car. If you are a DIY person, you could take it apart and inspect the pads/rotors and scuff them up a bit. I've fixed some minor annoying issues by doing that. Sometimes your pads can get glazed over, and I've had weird little bumps on my rotors that made a horrible grinding noise when coming to a stop. Used my grinder and cleaned/sanded the surface and it hasn't come back in 2 yrs.

2009 Honda... | Answered on May 18, 2017


I hope this helps you.k42282_1.jpg

2009 Honda... | Answered on May 15, 2017


Front caliper to carrier= 37 ft lbs
rear caliper to carrier= 17 ftlbs.
Found this info in my database.
2009-honda-accord-v6-coupe-torque-rear-xlfqkfv3poowfohabepzqwtd-4-0.jpg

2009 Honda... | Answered on Nov 12, 2016


need to adjust what:
valve or value

2009 Honda... | Answered on Sep 18, 2016


If you mean seat won't lock in position. Chance you can fix it but in my opinion get a new seat. I would go to a salvage yard. These seats have a tendency to break I have had several brake on me personally and have seen numerous other that had broken.

2009 Honda... | Answered on Jun 07, 2016


Mechanism most likely broken . I had a Hyundai and was rear ended and the mechanism broke plus I know of several other seat backs that broke on people

2009 Honda... | Answered on Jun 07, 2016


most cornwell tool dealers have autel scan tools in stock.


AUTMS906 MaxiSys Scan Tool Cornwell Webcat

2009 Honda... | Answered on Jun 06, 2016


You need to have the vehicle scanned for fault codes and then the causes of those codes diagnosed.

You will need to have this car checked out by a professional with the right diagnostic equipment for Hondas. The Vehicle Stability Assist (VSA)***, brake and ABS warnings may just be due to a failed sensor or sensors but you need to have a proper diagnosis carried out so the causes can be identified and any failed parts replaced.

The flashing D light relates to the auto transmission and may well be a caused by a faulty sensor on the transmission or something else. The correct scanner should throw up any fault codes being generated. In the meantime if your Accord model has the engine bay filler tube and diptstick for the auto transmission , check your fluid level in the auto transmission.

***VSA..................
http://techinfo.honda.com/rjanisis/pubs/OM/RL0000/RL0000O00189A.pdf

2009 Honda... | Answered on Nov 20, 2015

Not finding what you are looking for?
2009 Honda Accord Logo

244 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,940 Questions

1991 Honda Accord
1991 Honda Accord

2,649 Questions

1995 Honda Accord
1995 Honda Accord

1,606 Questions

1996 Honda Accord
1996 Honda Accord

1,608 Questions

1998 Honda Accord
1998 Honda Accord

1,531 Questions

Top Honda Experts

Marvin
Marvin

Level 3 Expert

84565 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Accord Honda

  • Accord Honda

Most Popular Question

2009 honda accord v6 coupe torque rear

  • Cars & Trucks
Loading...