Lexus RX 330 - Answered Questions & Fixed Issues

See this video. Release handles in the rear trunk area

Question edited to add the word 'Lexus'. Category changed from Seat (Spanish car maker) to Lexus RX330.

Lexus RX 330... | Answered on Mar 06, 2019 | 96 views

This is how you do it make sure the trip has the odometer showing, not the Trip A or B. 
Reset the system by the following procedure: 
1. Turn the ignition key to the “LOCK” position with the 
odometer reading shown. 
2. Turn the ignition key to the “ON” position while holding down the “ODO/TRIP” button. Hold down the button for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing. 

I have used this in every RX330 i have ever done. will not work if trip a or b is showing though

2005 Lexus RX330 | Answered on Feb 01, 2019 | 1,266 views

u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

2006 Lexus Rx... | Answered on Jan 26, 2019 | 28 views

any parts store will read / get codes for free...

2004 Lexus RX... | Answered on Sep 29, 2018 | 517 views

Hi. Sorry but the question isn't clear. I know that the cruise control can be repaired. But what type of diagnostic information are you looking for? To find the source of the failure my shop would run diagnostics. Possible failures would include faulty blake light switch, worn or dirty cruise control switch, broken clock spring or issue with power or ground. Please write back and let me know what you are looking for. I will be more than happy to help.

2004 Lexus RX... | Answered on Sep 18, 2018 | 42 views

Get this manual online at and get complete guide on whether to repair or not, service it, and how to repair etc, along with wiring diagrams, electrical diagrams,
torque specs, error codes, everything.

2005 Lexus RX330 | Answered on Mar 13, 2018 | 92 views

I suggest you try one of those instant download manuals. My brother ( a mechanic) buys it when he can't fix some technical issue He buys from . A
lot of mechanics actually do this. Website is very good for this. Must try it !!

2004 Lexus RX... | Answered on Mar 11, 2018 | 332 views

The first thing to check is if the engine has seized by turning the crankshaft with a large socket spanner. If it moves then it is not locked up. An auto electrician can tell within minutes if the starter motor or the electrics are faulty.

2004 Lexus RX... | Answered on Jan 22, 2018 | 56 views

diagnose and repair ABS system

2004 Lexus RX... | Answered on Jan 01, 2018 | 225 views

May be a relay problem

2004 Lexus RX... | Answered on Dec 12, 2017 | 298 views

reset the ECM using a scan tool

2008 Lexus Rx... | Answered on Nov 29, 2017 | 236 views

now that you have vented here do you fell any better??

2004 Lexus RX... | Answered on Sep 24, 2017 | 90 views

If the CV joint is defective it will make a loud clicking noise when you turn the wheel sharply.

Lexus RX 330... | Answered on Aug 30, 2017 | 48 views

If issue persists after rotating tires then the issue has to be something with the front end components.
Dealers will f--k you financially - I would try to get some good, local mechanic to deal with issue. Look for recommendations.

2004 Lexus RX... | Answered on Aug 23, 2017 | 332 views

Could be the neutral safety switch. Pull out the start relay and interrogate the relay socket with a volt/ohmmeter. One terminal should always show zero ohms to ground. One terminal should show 12vdc when the key is turned to start. One terminal should show a few ohms to ground (this terminal goes to the starter solenoid). The last terminal should show 12vdc from the pcm when the transmission is in park or neutral. This is the signal I suspect you will not get. If I am right, remove the neutral asfety switch and test it with an ohnmeter. Your diagram is at the link below.

2004 Lexus RX... | Answered on Aug 01, 2017 | 33 views

If you haven't already, try draining the transmission fluid and replacing it with new. It's recommended to complete this service every 60,000 miles. Also try adding Rislone transmission additive. It worked wonders on my Ford Escape! If you have the fluid changed by someone else, it's advisable to NOT flush the system. The pressure caused by vacuuming it out could create more harm than good.

2004 Lexus RX... | Answered on Jun 16, 2017 | 548 views

With a backup camera I installed on my wife's Pathfinder, there was a power wire that connected to the backup light power. So when the backup lights came on in reverse, the camera got power, sent a video signal to the dash radio screen, and it would automatically switch to that input. You might have a bad wire/connection supplying power to the camera.

2004 Lexus RX... | Answered on Jul 08, 2017 | 654 views

Did you check the brake fluid level? A low level might cause the light to come on.
If it's 1997 or newer, and then likely OBD2, take it to a local autozone or similar parts store. Most should scan and clear codes for free, hoping you will then buy parts from them.

2005 Lexus RX330 | Answered on May 26, 2017 | 221 views

Not finding what you are looking for?
Cars & Trucks Logo

-507 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lexus Experts


Level 3 Expert

85178 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides