I have a crow-footed prybar that I can hook the master cylinder studs and leverage it to turn, but they do make a special tool that slides over the studs and has a 3/4" nut for a socket and break-over bar to accomplish the same thing.
Sadly we do not supply parts. All I can suggest is you visit a store that sells that tool or go the the manufacturer's website and contact them about replacement parts. You will probably need the serial and model number to make sure you get the correct parts.
Let's troubleshoot this problem step by step:
Linkage Adjustment:
The issue might be related to the linkage between the shift lever and the transmission. Sometimes, the linkage can become bent, broken, or jammed.
Inspect the linkage carefully. Look for any signs of damage or debris that might be obstructing its movement.
If you find any bent or broken parts, consider repairing or replacing them. Also, ensure that the linkage is properly lubricated according to the user manual.
Purging the Transaxle:
Try purging the transaxle to ensure smooth operation. Follow these steps:
Place the mower on a level surface away from any obstacles.
Turn off the engine and apply the parking brake.
Disengage the transaxle by moving the freewheel control to the disengaged position.
Check for Mechanical Obstructions:
Inspect the area around the gear shift lever and the transmission for any obstructions.
To reset your Innova 3100 OBD2 code reader, follow these steps:
Verify the Connection:
Ensure that the tool is connected to the vehicle's Data Link Connector (DLC).
Confirm that the ignition is ON.
Turn Ignition OFF and ON:
Turn the ignition OFF.
Wait for 5 seconds.
Turn the ignition ON again.
This process will reset the computer. If you encounter any issues, refer to your Innova 3100 Owner's Manual. INNOVA 3100 OWNER'S MANUAL Pdf Download ' ManualsLib
Your best option here is to visit a store that sells Bebe products or contact Bebe directly to find out if they supply repair parts or replacement hoods. We unfortunately don't supply parts, we simply provide advice for repairing things.
These pipes can be a pain in the tailbone to work with. Here's a trick to try. Do this when the engine is cold.
Get a cup sized container and half fill it with hot but NOT boiling water. Put about a finger's length of that end of the pipe into the water and let it heat up. This softens the pipe and can help it stretch to fit.
OK, more information please. What year is this Bakkie? What engine is in it?
What Exactly does it do when you try to start it?
Nothing at all at the key, just a 'Clunk' or a very lazy turn over suggests a flat or weak battery. Batteries do get old and weak especially if they're over 5 years old or on a bigger size engine. Try putting it on charge overnight and see if that helps.
Does it just spin and not try to start? This could be a 'No Spark' issue.
Does it turn over, try to start then immediately stall? This might be a fuel supply problem.
Dash lights only use a small amount of voltage so they are often the last thing to stop working.
Let's troubleshoot this issue:
Valet Mode:
First, check if the trunk is in valet mode. Some vehicles have a setting that prevents the trunk from opening using the key fob or the dash button when in valet mode.
Look under the trunk at the top of the license plate area. You'll find a key slot there. Use the physical key section of your key fob to open the trunk manually.
Child Locks:
Ensure that the child lock feature is not accidentally engaged. If it is, the trunk won't open from the outside handle switch.
Switch the child lock to the unlock position and try pulling the trunk handle again before closing the door.
Trunk Release Relay:
If the above steps don't resolve the issue, there might be an issue with the trunk release relay.
Check if there's ground at the switch in the glove compartment when you activate the release switch on the door, the trunk release on the key fob, or the rear handle.
Use a paperclip to jumper between the #30 and the #87 pin sockets of the relay. The pin numbers are usually labeled on the relay body.
Mechanical Issues:
Inspect the trunk latch mechanism for any signs of damage or obstruction.
Verify that the outside trunk handle is properly connected to the latch.
Hyundai azera trunk unlock Switch (youtube.com)
If necessary, consult a professional mechanic to diagnose and fix any mechanical issues.
Remember to follow safety precautions while troubleshooting, and if you're unsure, it's best to seek professional assistance.